Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

close

keyboard_arrow_left

Table of Contents Expand all

play_arrow JSA Risk Manager Installation Overview
- JSA Risk Manager Installation Overview
play_arrow JSA Risk Manager Installation Prerequisites
- JSA Risk Manager Installation Prerequisites
play_arrow System Requirements for JSA Risk Manager
- System Requirements for JSA Risk Manager
play_arrow Installing JSA Risk Manager
play_arrow Install JSA Virtual Risk Manager Appliances
play_arrow Assigning the Risk Manager User Role
- Assigning the Risk Manager User Role
play_arrow Troubleshoot the Risks Tab
- Troubleshoot the Risks Tab
- Removing a Managed Host
play_arrow Re-adding JSA Risk Manager As a Managed Host
- Re-adding JSA Risk Manager As a Managed Host
play_arrow Reinstall JSA Risk Manager from the Recovery Partition
- Reinstall JSA Risk Manager from the Recovery Partition
- Reinstalling JSA Risk Manager by Using Factory Re-install
play_arrow Change Network Settings
play_arrow Data Back Up and Restore

list Table of Contents

English

keyboard_arrow_right

Installing JSA Risk Manager

date_range 09-May-22

arrow_backward

arrow_forward

A JSA Risk Manager deployment includes a JSA Console and JSA Risk Manager appliance as a managed host.

Select normal for the type of setup. Select Next and press Enter.
Select your time zone continent or area. Select Next and press Enter.
Select your time zone region. Select Next and press Enter.
Select an Internet Protocol version. Select Next and press Enter.
Select the interface that you want to specify as the management interface. Select Next and press Enter.
Type your host name, IP address, network mask, gateway, primary DNS, secondary DNS, public IP, and email server.
Network information for Internet Protocol version 4 (IPv4) network settings is required.

The Public IP network setting is optional. This secondary IP address is used to access the server, usually from a different network or the internet, and is managed by your network administrator. The Public IP address is often configured by using the Network Address Translation (NAT) services on your network or firewall settings on your network. NAT translates an IP address in one network to a different IP address in another network.
Select Next and press Enter.
Type a password to configure the JSA Risk Manager root password.
Select Next and press Enter.
Retype your new password to confirm. Select Finish and press Enter.
This process typically takes several minutes.

arrow_backward PREVIOUS System Requirements for JSA Risk Manager

NEXT arrow_forward Adding JSA Risk Manager to JSA Console

footer-navigation