Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Modify a Service Instance

Prerequisite

A superuser or network administrator can modify a service instance and provision the modified service in the network. When you provision a modified service instance, Paragon Automation generates a modify service order to provision the updated service. You can modify a service instance by uploading a preconfigured JSON file containing the changes. Alternatively, you can use the fields in the Paragon Automation GUI to modify the service-related parameters.

Note:

You cannot edit the Customer and Instance Name fields while modifying a service instance.

To modify a service instance:

  1. Click Orchestration > Instances.
    The Service Instances page appears.
  2. Select the service instance you want to edit and click the edit (pencil) icon.
    The Modify Service-Instance-Type page appears.
  3. In the General section, click Browse to upload a preconfigured JSON file that contains the modifications to the service instance.
    Alternatively, follow these steps to modify a service instance by using the GUI fields:

    • For L3VPN and EVPN, follow steps 4 and 5.

    • For L2 Circuit, follow steps 4 and 6.

  4. In the General section, modify the values in the fields, if applicable.
  5. (For L3VPN and EVPN) Modify the site settings:
    1. Click Next to proceed to the Site Settings section.
    2. In the Site Settings section, select the site that you want to modify and click the edit (pencil) icon.
      The Edit Site page appears.
    3. Modify the site details:

      • Edit L3VPN service site details by referring to Table 1.

      • Edit EVPN service site details by referring to Table 1.

    4. Click OK.
      To view the modified site details, expand the site name and expand Properties.
    5. To edit the site network access details, expand the site name and expand Site Network Access.
    6. Select the site network access that you want to modify and click the edit (pencil) icon.
      The Edit Connection page appears.
    7. Expand each section on the page to edit the field values as applicable:
    8. Modify the placement configurations by using one of the following options:

      • Placement option is displayed on the Edit Connection page—Expand Placement and modify the placement parameters by clicking the drop-down in each field. Table 1 lists the placement parameters.

      • Placement option is not displayed on the Edit Connection page:

        1. Click the Update Placements button on top of the page and click Yes when prompted to confirm.

          The service instance is saved to the Paragon Automation database and service orchestration automatically assigns possible placement options such as PE devices and interfaces, CE devices, and VLANs for the service instance. You see a message that the placement was successfully updated.

        2. To modify the placement configurations, select the service-instance-name on the Service Instances page and click the edit icon.

          The Modify Service-Instance-Name page appears.

        3. Proceed to the Site Settings section, select the site network access that you want to modify and click the edit icon.

          The Edit Connection page appears and the Placement option is displayed on the page.

        4. Expand Placement and modify the placement parameters by referring to Table 1.

        Note:

        Update Placements is a beta feature in this release.
      Note:

      The Placement parameter is not available if:

      • You modify site details such as site location and postal code.

      • Service orchestration could not allocate the PE device as a resource for the VPN service.

      • The execution state of the service order generated for the service is Not available.
      Table 1: Placement Parameters

      Field

      Description

      CE Node

      Click the CE Node drop-down and select the CE device that you want to connect to the PE device for the VPN service.

      PE Node

      Click the PE Node drop-down and select the PE device that you want to allocate for the VPN service.

      PE Interface

      Click the PE Interface drop-down and select the PE interface name that you want to assign for the VPN service.

      VLAN

      Click the VLAN drop-down and select the VLAN ID to which you want to assign the VPN service.
    9. Click OK to save the modified site network access details. The modified values are listed in the Site Network Access table.
      Alternatively, click Cancel to exit the Edit Connection page without saving the changes you made.
  6. (For L2 Circuit) Modify the VPN node settings:
    1. Click Next to proceed to the VPN Nodes section.
    2. In the VPN Nodes section, select the node that you want to modify and click the edit (pencil) icon.
      The VPN Node page appears. You can modify node details such as network accesses and signaling options. See Add L2 Circuit VPN Nodes.
      Note:

      You cannot edit the VPN node ID while modifying the node details.

  7. Click Next to proceed to the Summary section.

    You see a graphical map of your service topology and a summary of the service order.

  8. (Optional) Click Export to export and save the service order in JSON format on your local system.
  9. (Optional) Click Reset Placements to remove existing placement configurations for the service instance.

    Provisioning of a service instance might fail when existing placement configurations for the service instance are no longer available or applicable. When you reset placement parameters, service orchestration automatically assigns placement options for the instance before provisioning the service.

    Note:

    Reset Placements is a beta feature in this release.
  10. Click Next to proceed to the Schedule section.
  11. (Optional) Switch the Schedule toggle on if you want to schedule when to provision the modified service. The Schedule option is disabled by default.

    The Schedule field appears. Perform the following steps to schedule the date and time to provision the service:

    1. Click the calendar icon in the Schedule field.
    2. Select the date and time for provisioning the service, and click OK.
      The scheduled date and time are displayed in the MM/DD/YYYY HH:MM AM/PM format.
      Note:

      • You must set a present or future date and time to schedule provisioning of a service. If you select a past time and save the service order, the service is provisioned immediately.

      • To delete a provisioning schedule, select the service-instance-name on the Service Instances page and click the edit icon. On the Modify Service-Instance-Name page, proceed to the Schedule section. In the Schedule section, switch the Schedule toggle off and click Save. The provisioning schedule is deleted and the service instance is provisioned immediately.

  12. To save and provision the service instance, click one of the following buttons:

    • Save & Provision—Click this button and confirm when prompted, to save the service instance to the Paragon Automation database and provision the instance immediately. Selecting this option discards any provisioning schedule that you configured, and provisions the service immediately.

    • Save—Click this button to save the service instance to the Paragon Automation database. The Service Instances page appears and the modified service instance is listed in the Service Instances table.

      To provision the service instance automatically, configure the provisioning schedule as defined in step 11. To manually provision the service, select the service instance name in the Service Instances table and click theProvision button.

      Note:

      • The Provision button is disabled if you schedule the provisioning of a service instance. The service is provisioned automatically at the scheduled date and time.

Related Documentation