show chassis cluster information configuration-synchronization
Syntax
show chassis cluster information configuration-synchronization
Description
Display chassis cluster messages. The messages indicate the redundancy mode, automatic synchronization status, and if automatic synchronization is enabled on the device.
Required Privilege Level
view
Output Fields
Table 1 lists
the output fields for the show chassis cluster information configuration-synchronization command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
|---|---|
|
Node (device)
in the chassis cluster ( |
|
|
|
The timestamp of the event, the automatic configuration synchronization status, and the number of synchronization attempts. |
Sample Output
show chassis cluster information configuration-synchronization
user@host> show chassis cluster information configuration-synchronization node0: -------------------------------------------------------------------------- Configuration Synchronization: Status: Activation status: Enabled Last sync operation: Auto-Sync Last sync result: Not needed Last sync mgd messages: Events: Feb 25 22:21:49.174 : Auto-Sync: Not needed node1: -------------------------------------------------------------------------- Configuration Synchronization: Status: Activation status: Enabled Last sync operation: Auto-Sync Last sync result: Succeeded Last sync mgd messages: mgd: rcp: /config/juniper.conf: No such file or directory Network security daemon: warning: You have enabled/disabled inet6 flow. Network security daemon: You must reboot the system for your change to take effect. Network security daemon: If you have deployed a cluster, be sure to reboot all nodes. mgd: commit complete Events: Feb 25 23:02:33.467 : Auto-Sync: In progress. Attempt: 1 Feb 25 23:03:13.200 : Auto-Sync: Succeeded. Attempt: 1
Release Information
Command introduced in Junos OS Release 12.1X47-D10.