show virtual-chassis status (MX Series Virtual Chassis)

Assigned ID that applies to the entire Virtual Chassis configuration.

Member ID assigned in the preprovisioned Virtual Chassis configuration, and the Flexible PIC Concentrator (FPC) slot range, including offset, for each member router in the Virtual Chassis.

State of the member router:

• Heartbt—Router has used heartbeat packet connection to maintain primary role roles during an adjacency disruption or split in the Virtual Chassis configuration.

• Mismatch—Virtual Chassis not formed due to a mismatch in the slot count value of the member routers. In a Virtual Chassis with an MX2020 member router and either an MX960 or MX2010 member router, a mismatch status occurs if you do not set the slot count value of the MX960 router or MX2010 router to 20 to match the slot count of the MX2020 router.

• Prsnt—Router is currently connected to the Virtual Chassis.

• NotPrsnt—Router is not currently connected to the Virtual Chassis.

Serial number of the member router.

Model number of the member router.

Metric used by the Virtual Chassis software for the primary-role election algorithm.

This value is assigned by the software and is not configurable in the current release.

Role of the member router in the Virtual Chassis: Master or Backup.

The asterisk ( * ) following the Role denotes the router on which the show virtual-chassis status command was issued.

Member IDs and Virtual Chassis port interfaces (in the format vcp-slot/pic/port) to which this member router is connected.