Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

qos-adjust-adsl2

Syntax

Hierarchy Level

Description

Configure an adjustment factor that is applied globally to the downstream and upstream data rates reported by the ANCP agent for all subscribers on an ADSL2 line. The ANCP agent reports the adjusted rate only to AAA.

Note:

Starting in Junos OS Release 17.4R1, this statement is deprecated and replaced by the adsl2-total-adjust option of the access-line statement at the [edit system] hierarchy level. The ANCP agent ignores the qos-adjust-adsl2 statement if it is present. This means that when you upgrade from Junos OS Release 17.3 or earlier with an existing configuration, you must reconfigure your adjustment with the access-line statement.

Options

adjustment-factor—Adjustment factor applied to upstream and downstream data rates for the DSL type.

  • Range: 0 through 100 percent

  • Default: 100 percent

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 11.4.

Statement deprecated in Junos OS Release 17.4R1.

Related Documentation

Change History Table

Feature support is determined by the platform and release you are using. Use Feature Explorer to determine if a feature is supported on your platform.

Release
Description
17.4R1
Starting in Junos OS Release 17.4R1, this statement is deprecated and replaced by the adsl2-total-adjust option of the access-line statement at the [edit system] hierarchy level.