vdsl-bytes
Syntax
vdsl-bytes bytes;
Hierarchy Level
[edit protocols ancp qos-adjust]
Description
Adjust the number of frame overhead bytes by the specified number of bytes in the actual downstream rate reported in the ANCP Port Up message for a VDSL access line. The ANCP agent reports the adjusted value to CoS. The adjusted value accounts for the traffic encapsulation overhead.
Starting in Junos
OS Release 17.4R1, this statement is deprecated and replaced by the vdsl-overhead-bytes option of the access-line statement at the [edit system] hierarchy level. The ANCP agent ignores the vdsl-bytes statement if it
is present. This means that when you upgrade from Junos OS Release
17.3 or earlier with an existing configuration, you must reconfigure
your adjustment with the access-line statement.
Options
| bytes | Number of bytes added to or subtracted from the actual downstream frame overhead. |
Range: -100 through 100 bytes
Default: 0 bytes
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 14.2.
Statement deprecated in Junos OS Release 17.4R1.
Change History Table
Feature support is determined by the platform and release you are using. Use Feature Explorer to determine if a feature is supported on your platform.
vdsl-overhead-bytes option of the access-line statement at the [edit system] hierarchy level.