-
- play_arrow What's New in 23.4R1-S1
- play_arrow What's New in 23.4R1
- Hardware
- Authentication and Access Control
- Class of Service
- EVPN
- High Availability
- Interfaces
- IPv6
- Junos OS API and Scripting
- Junos Telemetry Interface
- Layer 2 VPN
- MPLS
- Multicast
- Precision Time Protocol (PTP)
- Routing Protocols
- Services Applications
- Software Installation and Upgrade
- Source Packet Routing in Networking (SPRING) or Segment Routing
- Subscriber Management and Services
- Additional Features
- What's Changed
- Known Limitations
- Open Issues
- Resolved Issues
-
- play_arrow What's New
- Hardware
- Authentication and Access Control
- Chassis
- EVPN
- High Availability
- Interfaces
- IPv6
- Junos OS API and Scripting
- Junos Telemetry Interface
- MPLS
- Multicast
- Network Management and Monitoring
- OpenConfig
- Routing Options
- Routing Policy and Firewall Filters
- Routing Protocols
- Services Applications
- Software Installation and Upgrade
- Source Packet Routing in Networking (SPRING) or Segment Routing
- Subscriber Management and Services
- Additional Features
- What's Changed
- Known Limitations
- Open Issues
- Resolved Issues
- Upgrade Your Junos OS Evolved Software
- Licensing
- Finding More Information
- Requesting Technical Support
- Revision History
ON THIS PAGE
Open Issues
Learn about open issues in this release for QFX5130-48C switches.
For the most complete and latest information about known Junos OS Evolved defects, use the Juniper Networks online Junos Problem Report Search application.
General Routing
Whenever user issues
request system power-cycleCLI command to perform remote power cycle of the device, an incomplete message string might be displayed on the console. PR1775828In an EVPN-VxLAN multicast scenario with BDs-not-being (BD - Bridge Domain) everywhere, PIM (Protocol Independent Multicast) Register Messages are not sent from the Border Leaf to the PIM-RP (Protocol Independent Multicast Rendezvous point), when the source of the multicast traffic is behind a Server Leaf and the Source-VLAN of the multicast traffic is not hosted by the Border Leaf device. PR1777493
Whenever a QFX5130-48C device is reset using rear panel reset button by pressing the button for short/long duration, the port LEDs on ports 56/57 might glow in amber for a few seconds during boot up. The port LEDs amber status turns off and reflects correct port state once the device is up.PR1792619
On QFX5130-48C, when a USB is plugged into the chassis, the USB disk does not show up in
show chassis hardware detailCLI command output until a subsequent reboot. Similarly when the USB stick is plugged out of the chassis, theshow chassis hardware detailCLI command continues to show up the USB stick as plugged into the chassis until subsequent reboot of the device. PR1793934On QFX5130-48C, when image upgrade is done using CLI, the log messages have kernel trace reported. There is no functionality impact due to the messages. PR1798213
QFX5130-48C: TX laser disable alarm for 400G DR4 optics is seen when multiple optics are jacked out and jacked in in quick succession. PR1798463
Infrastructure
QFX5130-48C running Junos OS Evolved 23.4R1-S1 image might report a vmcore during bootup. The device reboots itself to recover from the issue state. PR1768516
