close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Installing vMX on Contrail
- play_arrow Class of Service for vMX
- CoS on vMX Overview
- CoS Features and Limitations on vMX
- Configuring Hierarchical CoS on vMX
- Example: Configuring Hierarchical CoS on vMX
- Configuring Four-Level Hierarchical Scheduling on vMX
- Packet Loss Priority and Drop Profiles on vMX
- Managing Congestion Using Drop Profiles and Packet Loss Priorities on vMX
list Table of Contents
Configuring the Number of Active Ports on vMX
date_range
19-Nov-20
You can specify the number of active ports for vMX. The default number of ports is 10, but you can specify any value in the range of 1 through 23. You can change this number if you want to limit the number of Ethernet interfaces in the VCP VM to match the number of NICs added to the VFP VM.
Note:
If you are running virtio interfaces in lite mode, you can use up to 96 ports.
Other configurations running in performance mode support up to 23 ports.
To specify the number of active ports, configure the number
of ports at the [edit chassis fpc 0 pic 0] hierarchy level.
content_copy zoom_out_map
[edit] user@vmx# set chassis fpc 0 pic 0 number-of-ports
