Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

external-header-nav
keyboard_arrow_up
list Table of Contents
file_download PDF
keyboard_arrow_right

Tuning Performance Mode

date_range 19-Nov-20

To tune performance mode for the traffic, you can specify the number of Workers dedicated to processing multicast and control traffic. You can specify any value in the range of 0 through 15. The default of 0 specifies that all available Workers are used to process all traffic.

The number of dedicated Workers specified in relation to the number of available Workers results in the following behavior:

  • If the number of dedicated Workers is greater than or equal to the number of available Workers, then all available Workers are used to process all traffic.

  • If the number of dedicated Workers is less than the number of available Workers, then the first set of available Workers (equal to the specified number of dedicated Workers) is used to process multicast and control traffic while the remaining available Workers are used to process flow cache traffic.

To specify the number of dedicated Workers for processing multicast and control traffic, configure the number of Workers at the [edit chassis fpc 0 performance-mode] hierarchy level.

content_copy zoom_out_map
[edit]
user@vmx# set chassis fpc 0 performance-mode number-of-ucode-workers number-workers
Note:

Changing the number of Workers reboots the FPC.

external-footer-nav
Ask AI
close

How can I help you today?

LLMs can make mistakes. Verify important information.
chat_add_on New topic
send progress_activity
This conversation will be monitored and recorded. Any information you provide will be subject to our Privacy Notice and may be used for quality assurance purposes. Do not include any personal or sensitive information. Ask AI can make mistakes. Verify generated output for accuracy.
Protected by hCaptcha arrow_drop_down arrow_drop_up
Juniper Networks, Inc. | Privacy Notice | Terms of Use