Supported Platforms
show poe controller
Syntax
Release Information
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 12.2 for ACX2000 routers.
Description
Display configuration and status of the PoE controllers.
Required Privilege Level
view
List of Sample Output
show poe controller (EX3200 Switch)show poe controller (EX8200 Switch)
show poe controller (Controller Software Upgrade in Progress)
show poe controller (ACX2000 Router)
Output Fields
Table 1 lists the output fields for the show poe controller command. Output fields are listed in the approximate order in which they appear.
Table 1: show poe controller Output Fields
Field Name | Field Description |
|---|---|
Controller index | PoE controller number:
|
Maximum power | The maximum PoE power consumption for the switch or line card. This is the total amount of power available to the PoE controller to allocate to the PoE ports. |
Power consumption | Total amount of power being used by the PoE ports at the time the command is executed. |
Guard Band | Amount of power that has been placed in reserve for power demand spikes and that cannot be allocated to a PoE interface. |
Management | Power management mode: either Class or Static or high-power. Note: The mode high-power is available on only ACX2000 routers. |
Status | Status of the PoE controller:
|
Lldp Priority | Link Layer Discovery Protocol (LLDP) priority operating state. The state can be Enabled or Disabled. LLDP priority allows the PoE controller to assign interfaces the power priority provided by the connected powered device by using LLDP power negotiation rather than the power priority configured on the switch interface. |
Sample Output
show poe controller (EX3200 Switch)
user@switch> show poe controller Controller Maximum Power Guard Management Status Lldp index power consumption band Priority 0 130.00W 81.20W 10W Static AF_ENHANCE Disabled
show poe controller (EX8200 Switch)
user@switch> show poe controller Controller Maximum Power Guard Management Status Lldp index power consumption band Priority 0 792.00W 603.50W 0W Class AT/AF COMBO Disabled 4 915.00W 781.00W 0W Class AT/AF COMBO Disabled 7 915.00W 0.00W 0W Class AT/AF COMBO Disabled
show poe controller (Controller Software Upgrade in Progress)
user@switch> show poe controller
Controller Maximum Power Guard Management Status Lldp index power consumption band Priority 0 130.00W 0.00W 0W Static AF_ENHANCE Disabled 8** 130.00W 0.00W 0W Static SW_DOWNLOAD(10%) Disabled **New PoE software upgrade available. Use 'request system firmware upgrade poe fpc-slot <slot>' This procedure will take around 10 minutes (recommended to be performed during maintenance)
show poe controller (ACX2000 Router)
user@host> show poe controller Controller Maximum Power Guard Management Status Lldp index power consumption band Priority 0 130.0 W 14.2 W 0 W high-power UP
