Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

[edit chassis] Configuration Statement Hierarchy on EX Series Switches

This topic lists supported and unsupported configuration statements in the [edit chassis] hierarchy level on EX Series switches.

  • Supported statements are those that you can use to configure some aspect of a software feature on the switch.
  • Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them
  • Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.

This topic lists:

Supported Statements in the [edit chassis] Hierarchy Level

The following hierarchy shows the [edit chassis] configuration statements supported on EX Series switches:

chassis {aggregated-devices {ethernet {device-count number;}}alarm {ethernet {link-down (ignore | red | yellow);}management-ethernet {link-down (ignore | red | yellow);}}auto-image-upgrade;fpc slot-number{pic pic-number {sfpplus {pic-mode mode;tunnel-port port-number tunnel-services;}}power (off | on);power-budget-priority priority;}lcd-menu {fpc slot-number {menu-item (menu-name | menu-option);disable;nssu {upgrade-group group-name {fpcs (slot-number | [list-of-slot-numbers]);member member-id {fpcs (slot-number | [list-of-slot-numbers]);}}}psu {redundancy {n-plus-n;}redundancy {failover (on-disk-failure | on-loss-of-keepalives);graceful-switchover;keepalive-time seconds;}routing-engine {on disk-failure disk-failure-action action;}}vrf-mtu-check;}

Unsupported Statements in the [edit chassis] Hierarchy Level

All statements in the [edit chassis] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:

Table 1: Unsupported [edit chassis] Configuration Statements on EX Series Switches

Statement

Hierarchy

Note: Variables, such as filename, are not shown in the statements or hierarchies.

container-devices

[edit chassis]

link-down

[edit chassis container-devices]

no-multi-rate

[edit chassis fpc pic]

pic-mode

[edit chassis fpc pic shdsl]

power-budget-priority

[edit chassis fpc]

q-pic-large-buffer

edit chassis fpc pic]

shdsl

[edit chassis fpc pic]

 

Related Documentation

 

Published: 2012-12-11

Previous Page Next Page