Navigation
Related Documentation
- ACX, M, MX, SRX, T Series
- promiscuous-mode
- ACX, M, MX, QFX, SRX, T Series
- vci
- M, MX, T Series
- Configuring the Maximum Number of ATM1 VCs on a VP
- M, MX, SRX, T Series
- multipoint-destination
maximum-vcs
Syntax
maximum-vcs maximum-vcs;
Hierarchy Level
[edit interfaces at-fpc/pic/port atm-options vpi vpi-identifier]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
For ATM1 interfaces, configure the maximum number of virtual circuits (VCs) allowed on a virtual path (VP). When configuring ATM1 interfaces on the router, you must include this statement.
For a configured virtual path identifier (VPI), valid virtual channel identifier (VCI) numbers are from 0 through (maximum-vcs value – 1). VCI numbers 0 through 31 are reserved by the ATM Forum. It is recommended that you use a VCI number higher than 31 when connecting to an ATM switch.
Options
maximum-vcs—Maximum number of VCs on the VP.
Range: 1 through 4090
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, SRX, T Series
- promiscuous-mode
- ACX, M, MX, QFX, SRX, T Series
- vci
- M, MX, T Series
- Configuring the Maximum Number of ATM1 VCs on a VP
- M, MX, SRX, T Series
- multipoint-destination
Published: 2013-08-01
Related Documentation
- ACX, M, MX, SRX, T Series
- promiscuous-mode
- ACX, M, MX, QFX, SRX, T Series
- vci
- M, MX, T Series
- Configuring the Maximum Number of ATM1 VCs on a VP
- M, MX, SRX, T Series
- multipoint-destination
