Navigation
Supported Platforms
Related Documentation
- ACX, M, MX, SRX, T Series
- promiscuous-mode
- ACX, M, MX, QFX, SRX, T Series
- vci
- M, MX, T Series
- Configuring the Maximum Number of ATM1 VCs on a VP
- M, MX, SRX, T Series
- multipoint-destination
vpi (Define Virtual Path)
Syntax
vpi vpi-identifier {maximum-vcs maximum-vcs;oam-liveness {up-count cells;down-count cells;}oam-period (disable | seconds);shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);queue-length number;}}
Hierarchy Level
[edit interfaces at-fpc/pic/port atm-options]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
For ATM interfaces, configure the virtual path (VP).
 | Note: Certain options apply only to specific platforms. |
Options
vpi-identifier—ATM virtual path identifier. This is one of the VPIs that you define in the vci statement. (For a list of hierarchy levels at which you can include the vci statement, see vci.)
Range: 0 through 255
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, SRX, T Series
- promiscuous-mode
- ACX, M, MX, QFX, SRX, T Series
- vci
- M, MX, T Series
- Configuring the Maximum Number of ATM1 VCs on a VP
- M, MX, SRX, T Series
- multipoint-destination
Published: 2013-08-01
Supported Platforms
Related Documentation
- ACX, M, MX, SRX, T Series
- promiscuous-mode
- ACX, M, MX, QFX, SRX, T Series
- vci
- M, MX, T Series
- Configuring the Maximum Number of ATM1 VCs on a VP
- M, MX, SRX, T Series
- multipoint-destination
