Navigation
Supported Platforms
[edit interfaces] Hierarchy Level
The following CoS statements can be configured at the [edit interfaces] hierarchy level. This is not a comprehensive list of statements available at the [edit interfaces] hierarchy level. Only the statements that are also documented in this manual are listed here. For more information about interface configuration, see the Junos OS Network Interfaces Library for Routing Devices.
[edit interfaces]
interface-name {atm-options {linear-red-profiles profile-name {high-plp-max-threshold percent;low-plp-max-threshold percent;queue-depth cells high-plp-threshold percentlow-plp-threshold percent;}plp-to-clp;scheduler-maps map-name { forwarding-class class-name {epd-threshold cells plp1 cells;linear-red-profile profile-name;priority (high | low);transmit-weight (cells number | percent number);}vc-cos-mode (alternate | strict);}}per-unit-scheduler;shared-scheduler;schedulers number;unit logical-unit-number {atm-scheduler-map (map-name | default);copy-tos-to-outer-ip-header;family family {address address {destination address;}filter {input filter-name;output filter-name;}policer {input policer-name;output policer-name;}simple-filter {input filter-name;}}layer2-policer {input-policer policer-name;input-three-color policer-name;output-policer policer-name;output-three-color policer-name;}plp-to-clp;shaping {(cbr rate | rtvbr peak rate sustained rate burst length |vbr peak rate sustained rate burst length);}vci vpi-identifier.vci-identifier;}}
On the Juniper Networks MX Series 3D Universal Edge Routers with Enhanced Queuing DPCs and on M Series and T Series routers with IQ2E PIC, you can configure the following CoS statements at the [edit interfaces] hierarchy level:
[edit interfaces]
