Navigation
Supported Platforms
[edit protocols pim] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit protocols pim] hierarchy level on EX Series switches.
- Supported statements are those that you can use to configure some aspect of a software feature on the switch.
- Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
- Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.
This topic lists:
Supported Statements in the [edit protocols pim] Hierarchy Level
The following hierarchy shows the [edit protocols pim] configuration statements supported on EX Series switches:
protocols {pim {assert-timeout seconds;default-vpn-source {interface-name interface-name;}dense-groups {address <announce | reject>;}disable;dr-election-on-p2p;export [ policy-names ];family (inet | inet6) {disable;}graceful-restart {disable;restart-duration seconds;}import [ policy-names ];interface interface-name {accept-remote-source;disable;bfd-liveness-detection {authentication {algorithm (keyed-md5 | keyed-sha-1 | meticulous-keyed-md5 | meticulous-keyed-sha-1 | simple-password);key-chain key-chain-name;loose-check;}detection-time {threshold milliseconds;}minimum-interval milliseconds;minimum-receive-interval milliseconds;multiplier number;no-adaptation;transmit-interval {minimum-interval milliseconds;threshold milliseconds;}version (1 | automatic);}disable;family (inet | inet6) {disable;}hello-interval seconds;mode (bidirectional-sparse | bidirectional-sparse-dense | dense | sparse | sparse-dense);neighbor-policy [ policy-names ];override-interval milliseconds;priority number;propagation-delay milliseconds;reset-tracking-bit;version (1 | 2);}join-load-balance;join-prune-timeout seconds;mpls-internet-multicast;nexthop-hold-time time;no-wildcard-register-stop;nonstop-routing {disable;}override-interval milliseconds;propagation-delay milliseconds;reset-tracking-bit;rib-group {inet group-name;inet6 group-name;}rp {auto-rp {(announce | discovery | mapping);(mapping-agent-election | no-mapping-agent-election);}bootstrap {family (inet | inet6) {export [ policy-names ];import [ policy-names ];priority number;}}bootstrap-export [ policy-names ];bootstrap-import [ policy-names ];bootstrap-priority number;dr-register-policy [ policy-names ];embedded-rp {group-ranges {ip-prefix</prefix-length>;}maximum-rps limit;}local {address address;disable;family (inet | inet6) {address address;anycast-pim {local-address address;rp-set {address address <forward-msdp-sa>;}}disable;group-ranges {ip-prefix</prefix-length>;}hold-time seconds;override;priority number;}group-ranges {ip-prefix</prefix-length>;}hold-time seconds;override;priority number;}register-probe-time time;rp-register-policy [ policy-names ];static {address address {group-ranges {ip-prefix</prefix-length>;}override;version (1 | 2);}}}spt-threshold {infinity [ policy-names ];}traceoptions {file filename <files number> <size maximum-file-size> <world-readable | no-world-readable>;flag flag <flag-modifier> <disable>;flag (route | state) <flag-modifier> <disable> <filter <match-on prefix> <policy [ policy-names ]>>;}}}
Unsupported Statements in the [edit protocols pim] Hierarchy Level
All statements in the [edit protocols pim] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented.
