Supported Platforms
Related Documentation
- EX Series
- Configuring SNMP (J-Web Procedure)
- Additional Information
- Network Management Administration Guide for Routing Devices
[edit snmp] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit snmp] hierarchy level on EX Series switches.
- Supported statements are those that you can use to configure some aspect of a software feature on the switch.
- Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
- Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, seeEX Series Switch Software Features Overview
This topic lists:
Supported Statements in the [edit snmp] Hierarchy Level
The following hierarchy shows the [edit snmp] configuration statements supported on EX Series switches:
Unsupported Statements in the [edit snmp] Hierarchy Level
All statements in the [edit snmp] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:
Table 1: Unsupported [edit snmp] Configuration Statements on EX Series Switches
Statement | Hierarchy |
---|---|
Note: Variables, such as community-name, are not shown in the statements or hierarchies. | |
logical-system | [edit snmp community] |
logical-systems-trap-filter | [edit snmp] |
Related Documentation
- EX Series
- Configuring SNMP (J-Web Procedure)
- Additional Information
- Network Management Administration Guide for Routing Devices
Published: 2014-04-24
Supported Platforms
Related Documentation
- EX Series
- Configuring SNMP (J-Web Procedure)
- Additional Information
- Network Management Administration Guide for Routing Devices