show poe controller




show poe controller


<detail | summary>

Command introduced in JUNOS Release 9.0 for EX-series switches.

Display the status of the Power over Ethernet (PoE) software module controller.

none — Display general parameters of the PoE software module controller.

detail | summary — (Optional) Display the specified level of output.

view

Table 1 lists the output fields for the show poe controller command. Output fields are listed in the approximate order in which they appear.

Table 1: show poe controller Output Fields

Field Name	Field Description
Ctrl-index	Identifies the controller.
Max-power	Specifies the maximum power that can be provided by the switch to PoE ports.
power-consumption	Specifies the total amount of power being used by the PoE ports, as measured by the specified telemetries settings.
Guard-band	Specifies the amount of power that has been placed in reserve.
Management	Specifies the management mode. Static is the only management mode supported.

user@host> show poe controller

Ctrl-index  Max-power power-consumption  Guard-band  Management
    0       305 W       0W                15W         Static