• Download PDFs
• alertentries  

• Related Topics
• Configuring SNMP Traps
• monalerts
• snmp

alertentries

Syntax

alertentries -T system:mm[x] -recipient-number <-f filter-type> <-n recipient-name> <-status (on | off)> <-t snmp>

Release Information

Command supported by JUNOS Release 9.1 and later.

Description

(JCS management module CLI) Display or configure the recipients of SNMP alerts generated by the JCS management module.

Options

-T system:mm[x]—Specify a JCS management module as the command target. Replace x with the primary management module number (1 or 2).

-recipient-number—Create or specify an alert recipient. Each alert recipient you create must have a unique number (1 through 12).

-f filter-type—(Optional) Filter the type of alerts received by the alert recipient. Replace filter-type with a value of critical (receive critical alerts only) or none (no filtering, receive all alerts).

-n recipient-name—(Optional) Specify the name of the alert recipient. Recipient names can be up to 31 characters in length. The name can include any character (including spaces), except for less than (<) and greater than (>) symbols.

-status (on | off)—(Optional) Set alert status for the specified alert recipient. When the status is on, the recipient receives alarm notifications. When the status is off, the recipient does not receive alarm notifications.

-t snmp—(Optional) Sets SNMP as the alert notification method for the specified alert recipient.

Required Privilege Level

operator (display)

supervisor (display or configure)

List of Sample Output

Output Fields

Table 1 lists the output fields for the alertentries command. Output fields are listed in the approximate order in which they appear.

Table 1: alertentries Output Fields

Sample Output

—status on
-n test1
-f critical
-t snmp

OK