You configure multilink and link services interface properties at the logical unit level. Default settings for multilink and link services logical interface properties are described in the section Default Settings for Multilink and Link Services Logical Interfaces.
For general information about logical unit properties or family inet properties, see the JUNOS Network Interfaces Configuration Guide. For information about multilink and link services properties you configure at the family inet hierarchy level, see Configuring the Links in a Multilink or Link Services Bundle.
 |
Note: On DS0, E1, or T1 interfaces in LSQ bundles, you can configure the bandwidth statement, but the routing platform does not use the bandwidth value if the interfaces are included in an MLPPP or MLFR bundle. The bandwidth is calculated internally according to the time slots, framing, and byte-encoding of the interface. For more information about logical iterface properties, see the JUNOS Network Interfaces Configuration Guide. |
Table 18 lists the default settings for multilink and link services statements, together with the other permitted values or value ranges.
Table 18: Multilink and Link Services Logical Interface Statements
See Table 19 for statements that apply to link services physical interfaces only.