• Downloads
• temps    

• Related Topics
• Displaying Temperature Information

temps

Syntax

temps -T target

Release Information

Command supported by JUNOS Release 9.1 and later.

Description

(JCS1200 platform only) Show temperature information (in degrees Fahrenheit) for components in the JCS chassis. This information is useful for viewing current temperature values and temperature threshold settings.

Options

-T target—Specify the target of the temps command. Valid targets for this command are:

• system:blade[x]—Specify a Routing Engine as the command target. Replace x with the Routing Engine slot number (1 through 12).
• system:switch[x]—Specify a JCS switch module as the command target. Replace x with the switch number (1 or 2).
• system:mm[x]—Specify a JCS management module as the command target. Replace x with the primary management module number (1 or 2).

Required Privilege Level

operator (display)

List of Sample Output

Output Fields

Table 1 lists the output fields for the temps command. Output fields are listed in the approximate order in which they appear.

Table 1: temps Output Fields

Sample Output

Component     Value     Warning     Reset     Hysteresis
CPU1          38.00     85.00       95.00     (7.00)
CPU2          35.00     85.00       95.00     (7.00)

Component     Value     Warning     Reset     Hysteresis
MM Ambient    43.00     60.00       55.00     (5.00)