Chassis Status LEDs on a QFX3008-I Interconnect Device
The front panel of the chassis of a QFX3008-I Interconnect device has four sets of informational LEDs to the left of the LCD panel.
See Figure 1.
Table 1 describes the chassis status LEDs in a QFX3008-I Interconnect device, their colors and states, and the status they indicate.
Table 1: Chassis Status LEDs on a QFX3008-I Interconnect Device
Description | Color | State | Description |
|---|---|---|---|
Minor alarm (triangle) | Unlit | Off | No alarm. |
Yellow or Amber | On steadily | A minor alarm indicates a noncritical condition that requires monitoring or maintenance. A minor alarm that is left unchecked might cause interruption in service or performance degradation. The minor and major alarm LEDs can be lit simultaneously. See Chassis Alarm Messages on a QFX3008-I Interconnect Device. | |
Major alarm (round) | Unlit | Off | No alarm. |
Red | On steadily | A major alarm indicates a critical error condition that requires immediate action. The minor and major alarm LEDs can be lit simultaneously. See Chassis Alarm Messages on a QFX3008-I Interconnect Device. | |
Fan trays | Unlit | Off | There is no power to the component. |
Amber | Blinking | There is a component failure, and the indicated fan tray should be replaced. | |
Green | On steadily | The fan tray is operating normally. | |
Power supplies | Unlit | Off | There is no input power to the power supply. |
Amber | Blinking | There is a component failure, and the indicated power supply should be replaced. | |
Green | On steadily | The AC input and DC output for the power supply are OK. | |
System power | Unlit | Off | The device is powered off. |
Amber | Blinking | One or more power component failures are generating one or more alarms. | |
Green | On steadily | The AC input and DC output for the system are OK. | |
System status | Unlit | Off | The device is powered off. |
Green | On steadily | The fan trays and front and rear cards are operating normally. | |
Intermittent blinking | The beacon feature has been enabled on the device using the request chassis beacon command. | ||
Amber | Blinking | One or more fan tray or front or rear card component failures are generating one or more alarms. |
