- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow MX2010 Router Overview
- play_arrow Chassis Components and Descriptions
- MX Series Router Architecture
- MX2010 Chassis Description
- MX2010 Backplane Description
- MX2010 Component Redundancy
- MX2010 Field-Replaceable Units
- MX Series Router Packet Forwarding Engine (PFE) Architecture
- Line Cards Supported on MX Series Routers
- Ethernet Frame Counts and Statistics on MX Series Routers
- Understanding Trio Layer 2 Feature Parity
- MX2010 Router Hardware Components and CLI Terminology
- play_arrow Alarm and Display Components
- play_arrow Cable and Rack Management
- play_arrow Cooling System
- play_arrow Host Subsystem Components
- MX2000 Host Subsystem CB-RE Description
- RE-MX2000-1800x4 CB-RE Description
- REMX2K-X8-64G and REMX2K-X8-64G-LT CB-RE Description
- REMX2K-X8-128G CB-RE Description
- CB-RE LEDs
- MX2000 Switch Fabric Board (SFB) Overview
- MX2000-SFB-S Switch Fabric Board Description
- MX2000-SFB2-S Enhanced Switch Fabric Board Description
- MX2000-SFB3 Switch Fabric Board Description
- MX2000 Switch Fabric Board LED
- play_arrow Interface Modules— ADCs, MPCs, and MICs
- MX Series Interface Module Reference
- MX2000 Adapter Card (ADC) Description
- MX2010 Modular Port Concentrator Description
- MPCs Supported by MX Series Routers
- MX2010 Modular Port Concentrator LEDs
- MX2010 MPC Terminology
- MX2010 Modular Interface Card Description
- MICs Supported by MX Series Routers
- MX2010 Modular Interface Card LEDs
- MX2010 Port and Interface Numbering
- play_arrow Power System
- MX2010 Power System Description
- MX2010 Power Midplane Description
- MX2000 Three-Phase Delta AC Power Distribution Module Description
- MX2000 Three-Phase Wye AC Power Distribution Module Description
- MX2000 Seven-Feed Single-Phase AC Power Distribution Module Description
- MX2000 Nine-Feed Single-Phase AC Power Distribution Module Description
- MX2000 Three-Phase Delta and Wye AC Power Distribution Module LEDs
- MX2000 AC Power Supply Module Description
- MX2010 AC Power Supply Module LEDs
- MX2010 DC Power Distribution Module (-48 V) Description
- MX2000 DC Power Distribution Module (240 V China) Description
- MX2010 DC Power Distribution Module (-48 V) LEDs
- MX2000 DC Power Distribution Module (240 V China) LEDs
- MX2010 DC Power Supply Module (-48 V) Description
- MX2000 DC Power Supply Module (240 V China) Description
- MX2010 DC Power Supply Module LEDs
- MX2010 High-Voltage Universal (HVAC/HVDC) Power Distribution Module Description
- MX2010 High-Voltage Universal (HVAC/HVDC) Power Distribution Module LEDs
- MX2010 High-Voltage Universal (HVAC/HVDC) Power Supply Module Description
- MX2010 High-Voltage Universal (HVAC/HVDC) Power Supply Module LEDs
-
- play_arrow Initial Installation and Configuration
- play_arrow Installation Overview
- Installing an MX2010 Router Overview
- Tools and Parts Required to Unpack the MX2010 Router
- Tools Required to Install the MX2010 Router Using a Pallet Jack
- Tools Required to Install the MX2010 Router Using a Router Transport Kit
- Tools and Parts Required to Maintain the MX2010 Hardware Components
- Tools and Parts Required for Connecting an MX2000 Router to Power
- Tools and Parts Required for MX2010 Router Connections
- play_arrow Unpacking the Router
- play_arrow Installing the Mounting Hardware
- play_arrow Installing the Router
- Removing Components from the MX2010 Router Chassis Before Installing It in a Rack
- Installing an MX2010 Router Using a Pallet Jack Overview
- Installing the Pallet Jack Attachment
- Installing the MX2010 Router Using a Pallet Jack with Attachment
- Installing an MX2010 Router Using a Router Transport Kit Overview
- Installing the Router Transport Kit on the MX2010 Router
- Securing the MX2010 Router to the Router Transport Platform
- Using the Router Transport Kit to Install the MX2010 Router in a Four-Post Rack
- Using the Router Transport Kit to Install the MX2010 Router in an Open-Frame Rack
- Reinstalling Components in the MX2000 Router After Initially Installing the Router in a Rack
- play_arrow Connecting the Router to Power
- Grounding an MX2000 Router
- Connecting AC Power to an MX2000 Router with Three-Phase Delta AC Power Distribution Modules
- Connecting AC Power to an MX2000 Router with Three-Phase Wye AC Power Distribution Modules
- Connecting Power to an MX2000 Single-Phase AC Power Distribution Module
- Mapping Input Power from AC Power Distribution Modules to AC Power Supply Modules on MX2000 Routers
- Connecting Power to a DC-Powered MX2010 Router with Power Distribution Modules (-48 V)
- Connecting Power to a DC-Powered MX2000 Router with DC Power Distribution Modules (240 V China)
- Connecting Power to a High Voltage-Powered MX2000 Router with Power Distribution Modules
- Connecting an MX2000 DC Router Power Distribution Module (-48 V) Cable
- Connecting an MX2000 DC Router Power Distribution Module (240 V China) Cable
- Powering On the DC-Powered MX2010 Router
- Powering On the DC-Powered (240 V China) MX2000 Router
- Powering On the High-Voltage Powered Universal (HVAC/HVDC) MX2000 Router
- Powering On a Three-Phase AC-Powered MX2000 Router
- play_arrow Connecting the Router to the Network
- Connecting the MX2010 Router to Management and Alarm Devices
- Connecting the MX2010 Router to a Network for Out-of-Band Management
- Connecting an MX2000 Router to a Console or Auxiliary Device
- Connecting an MX2010 Router to an External Alarm-Reporting Device
- Connecting the Alarm Relay Wires to the MX2010 Craft Interface
- Disconnecting the Alarm Relay Wires from the MX2010 Craft Interface
- Connecting MPC or MIC Cables to the MX2010 Router
- Register Products—Mandatory to Validate SLAs
- play_arrow Initially Configuring the Router
-
- play_arrow Installing and Replacing Components
- play_arrow Installing Components
- Installing an MX2010 Adapter Card
- Installing the MX2010 Air Filter
- Installing the MX2010 Craft Interface
- Installing the MX2010 Standard DC Cable Manager
- Installing an MX2000 Router DC Power Distribution Module (-48 V)
- Installing an MX2000 Router DC Power Distribution Module (240 V China)
- Installing an MX2000 Router High-Voltage Universal (HVAC/HVDC) Power Distribution Module
- Installing an MX2010 DC Power Supply Module (-48 V)
- Installing MX2000 Router DC Power Supply Modules (240 V China)
- Installing MX2000 Router High-Voltage Universal (HVAC/HVDC) Power Supply Modules
- Installing an MX2010 Dual-Wide MIC
- Installing the MX2010 Standard EMI Cover
- Installing the MX2010 Extended EMI Cover
- Installing an MX2010 Fan Tray
- Installing the MX2010 Air Baffle
- Installing the MX2010 Standard Cable Manager
- Installing the MX2010 Extended Cable Manager
- Installing the MX2010 Extended DC Cable Manager
- Installing an MX2010 MIC
- Installing an MX2000 SFB
- Installing an MX2010 CB-RE
- Installing MX2000 Router AC Power Supply Modules
- Installing MX2000 Router DC Power Supply Modules (-48 V)
- Installing an MX2000 Router Three-Phase Delta AC Power Distribution Module
- Installing an MX2000 Router Three-Phase Wye AC Power Distribution Module
- Installing an MX2000 Single-Phase AC Power Distribution Module
- Installing an SFP or XFP into an MX2000 MPC or MIC
- play_arrow Replacing Components
- Tools and Parts Required for Replacing MX2010 Hardware Components
- Tools and Parts Required to Remove Components from an MX2010 Router
- Removing a CB-RE from an MX2000 Router
- Upgrading to the Control Board-Routing Engine REMX2K-X8-64G in a Redundant Host Subsystem
- Upgrading to the REMX2K-X8-64G CB-RE in a Nonredundant Host Subsystem
- Replacing a Cable on an MX2010 MPC or MIC
- Replacing the MX2010 Air Filters
- Replacing the MX2010 Standard Cable Managers
- Replacing the MX2010 Extended Cable Manager
- Replacing the MX2010 Craft Interface
- Replacing an MX2010 DC Power Supply Module (-48 V)
- Replacing an MX2000 DC Power Supply Module (240 V China)
- Replacing an MX2000 High-Voltage Second-Generation Universal (HVAC/HVDC) Power Supply Module
- Replacing an MX2000 DC Power Distribution Module (-48 V)
- Replacing an MX2000 DC Power Distribution Module (240 V China)
- Replacing an MX2000 High-Voltage Universal (HVAC/HVDC) Power Distribution Module
- Replacing an MX2010 DC Power Distribution Module Cable
- Connecting an MX2000 DC Router Power Distribution Module (240 V China) Cable
- Replacing the MX2010 Standard EMI Cover
- Replacing the MX2010 Extended EMI Cover
- Replacing an MX2010 Fan Tray
- Replacing the MX2010 Air Baffle
- Replacing an MX2010 MIC
- Replacing an MX2010 MPC and Adapter Card
- Replacing an MX2000 SFB
- Replacing an MX2000 CB-RE
- Replacing an SFP or XFP Transceiver on an MX2010 MPC or MIC
- Replacing an MX2000 AC Power Supply Module
- Replacing an MX2010 Three-Phase Delta AC Power Cord
- Replacing an MX2000 Three-Phase Delta AC Power Distribution Module
- Replacing an MX2010 Three-Phase Wye AC Power Cord
- Replacing an MX2020 Three-Phase Wye AC Power Distribution Module
-
- play_arrow Maintaining the Chassis and Components
- play_arrow Maintaining Components
- Maintaining the MX2010 Adapter Cards
- Maintaining Cables That Connect to MX2010 MPCs or MICs
- Maintaining and Verifying the Status of the MX2010 Router Components
- Maintaining the MX2010 Air Filters
- Maintaining the MX2010 Air Vents
- Maintaining the MX2010 Chassis FRU Power-On Sequence
- Maintaining the MX2010 Control Boards
- Maintaining the MX2010 Cooling System Components
- Maintaining the MX2010 Cooling System Zones
- Maintaining the MX2010 Ethernet Switch
- Maintaining the MX2010 Fan Trays
- Maintaining the MX2010 Air Baffle
- Maintaining the MX2010 Host Subsystem
- Maintaining MX2010 MICs
- Maintaining MX2010 MPCs
- Maintaining MX2010 Packet Forwarding Engine Components
- Maintaining the Power Supply Modules on the MX2000 Line of Routers
- Maintaining the MX2010 Power Usage
- Converting an MX2000 Router Between AC and DC Power
- Maintaining the MX2010 Routing Engines
- Maintaining the MX2010 SFB
- Maintaining the MX2010 Switch Processor Mezzanine Board (SPMB)
- Maintaining and Verifying the MX2010 Router Version
- Maintaining and Verifying the Status of the MX2010 Craft Interface
- Taking an MX2000 Host Subsystem Offline
- Holding an MX2010 MPC
- Storing an MX2010 MPC
- Routine Maintenance Procedures for the MX2010 Router
- play_arrow Packing and Returning Components
- play_arrow Powering Off the Router
-
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
- play_arrow Contacting Customer Support
- play_arrow Locating Component Serial Numbers
- Displaying MX2010 Router Components and Serial Numbers
- MX2010 CB-RE Serial Number Label
- MX2010 Chassis Serial Number Label
- MX2010 Craft Interface Serial Number Label
- MX2010 Fan Tray Serial Number Label
- MX2010 MIC Serial Number Label
- MX2010 MPC Serial Number Label
- MX2010 Power Distribution Module Serial Number Label
- MX2010 Power Supply Module Serial Number Label
- MX2010 SFB Serial Number Label
- play_arrow Packing and Returning Components
-
- play_arrow Safety and Compliance Information
- play_arrow General Safety Guidelines and Warnings
- play_arrow Installation and Maintenance Safety Guidelines and Warnings
- play_arrow Radiation and Laser Warnings
- play_arrow Maintenance and Operational Safety Guidelines and Warnings
- play_arrow Electrical Safety Guidelines and Warnings
- General Electrical Safety Guidelines and Warnings
- Prevention of Electrostatic Discharge Damage
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- DC Power Copper Conductors Warning
- DC Power Disconnection Warning
- DC Power Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Midplane Energy Hazard Warning
- Multiple Power Supplies Disconnection Warning
- Action to Take After an Electrical Accident
- play_arrow Agency Approvals and Compliance Statements
-
MX2010 AC Power Requirements
To allow for future growth so that you can operate the router in any hardware configuration without upgrading the power infrastructure, we recommend that you provision 2800 W for each AC power distribution module (PDM) (three-phase or single-phase).
If you do not plan to provision 2800 W for each AC power supply module, use the information in Table 1 and Table 2 to calculate power consumption for various hardware configurations, input current from a different source voltage, and thermal output.
Table 3 lists the power requirements for various hardware components when the router is operating under typical voltage conditions.
Component | Power Requirement (Watts) |
|---|---|
Base system (not including MPCs, ADCs, and MICs) includes seven SFBs, one host subsystem (Control Board and Routing Engine [CB-RE], two fan trays, a craft interface, four PSMs, and two PDMs. | 9,439 W (based on 55° C operation) 2,142 W (Typical) |
Component | Model Number | Power Requirement (Watts) with 91% Efficiency |
|---|---|---|
Base chassis | CHAS-BP-MX2010 | |
Fan trays, upper | MX2000-FANTRAY | 100 W * 2 = 200 W |
Fan trays, lower | MX2000-FANTRAY | 100 W * 2 = 200 W |
MPC | MPC-3D-16XGE-SFPP | 440 W * 10 = 4400 W |
ADC | ADC | 150 W * 10 = 1500 W |
CB-RE | RE-MX2000-1800X4 | 150 W |
SFB—slots 0 through 7 | MX2000-SFB | 200 W * 8 = 1600 W |
Three-phase delta AC PDM (2 per system) @ 50 A feed (input 1) and 25 A feed (input 2) | MX2000-PDM-AC-DELTA | 2800 W |
Three-phase wye AC PDM @ 30 A feed (input 1) and 15 A (input 2) | MX2000-PDM-AC-WYE | 2800 W |
Nine-feed single-phase AC PDM | MX2K-PDM-AC-1PH | 2800 W |
Seven-feed single-phase AC PDM | MX2K-PDM-OP-AC | 2800 W |
If you do not plan to provision as recommended above, you can use the information in Table 3 to calculate the power consumption for your hardware configuration.
Component | Model Number | Maximum Power Requirement |
|---|---|---|
| Switch Fabric Boards (SFBs) | ||
SFB | MX2000-SFB | 200 W (Typical) 220 W at 55° C 220 W at 40° C 220 W at 25° C |
SFB2 | MX2000-SFB2-S | 220 W (Typical) 265 W at 55° C 250 W at 40° C 240 W at 25° C |
| Fan Trays | ||
Fan trays, Upper) | MX2000-FANTRAY | 100 W (Typical) 500 W at 55° C 330 W at 40° C 300 W at 25° C |
Fan Trays, Lower | MX2000-FANTRAY | 100 W (Typical) 1700 W at 55° C 1150 W at 40° C 350 W at 25° C |
| Adapter Cards | ||
ADC | MX2000-LC-ADAPTER | 150 W |
| Control Board and Routing Engine | ||
CB-RE | RE-MX2000-1800X4 | 150 W (Typical) 250 W at 55° C 250 W at 40° C 250 W at 25° C |
CB-RE | REMX2K-X8-64G | 400 W |
| MPCs | ||
16x10GE MPC (seeMPC-3D-16XGE-SFPP) | MPC-3D-16XGE-SFPP | 440 W at 55° C ambient |
MPC1 (see MPC1) | MX-MPC1-3D MX-MPC1E-3D | 165 W With MICs and optics:239 W at 55° C 227 W at 40° C 219 W at 25° C |
MPC1 Q (see MPC1 Q) | MX-MPC1-3D-Q MX-MPC1E-3D-Q | 175 W With MICs and optics:249 W at 55° C 237 W at 40 C 228 W at 25° C |
MPC2 (see MPC2) | MX-MPC2-3D MX-MPC2E-3D | 274 W With MICs and optics:348 W at 55° C 329 W at 40° C 315 W at 25° C |
MPC2 Q (see MPC2 Q ) MPC2 EQ (see MPC2 EQ ) | MX-MPC2-3D-Q MX-MPC2-3D-EQ MX-MPC2E-3D-Q MX-MPC2E-3D-EQ | 294 W With MICs and optics:368 W at 55° C 347 W at 40° C 333 W at 25° C |
MPC2E P (see MPC2E P) | MX-MPC2E-3D-P | 294 W With MICs and optics:368 W at 55° C 347 W at 40° C 333 W at 25° C |
MPC3E (see MPC3E) | MX-MPC3E-3D | 440 W With MICs and optics:500 W at 55° C, two 40 W MICs 485 W at 40° C, two CFP MICs with LR4 optics 473 W at 25° C, two CFP MICs with LR4 optics |
32x10GE MPC4E (see 32x10GE MPC4E) | MX-MPC4E-3D-32XGE-SFPP | 610 W With MICs and optics:607 W at 55° C, two 40 W MICs 590 W at 40° C, two CFP MICs with LR4 optics 585 W at 25° C, two CFP MICs with LR4 optics |
2x100GE + 8x10GE MPC4E (see 2x100GE + 8x10GE MPC4E) | MX-MPC4E-2CGE-8XGE | 610 W With MICs and optics:610 W at 55° C, two 40 W MICs 550 W at 40° C, two CFP MICs with LR4 optics 530 W at 25° C, two CFP MICs with LR4 optics |
MPC5E-40G10G MPC5EQ-40G10G | 645 W With optics:604 W at 55° C, with SFPP ZR and CFP LR4 optics 541 W at 40° C, with SFPP ZR and CFP LR4 optics 511 W at 25° C, with SFPP ZR and CFP LR4 optics | |
MPC5E-100G10G MPC5EQ-100G10G | With optics: 607 W at 55° C 541 W at 40° C 511 W at 25° C | |
MX2K-MPC6E | 1088 W with MICs and optics | |
MPC7E-MRATE | 400 W (Typical) 545 W at 55° C 465 W at 40° C 440 W at 25° C | |
| (without MICs) | MX2K-MPC8E | 688 W (Typical) 805 W at 55° C 720 W at 40° C 690 W at 25° C |
| (without MICs) | MX2K-MPC9E | 838 W (Typical) 1018 W at 55° C 870 W at 40° C 840 W at 25° C |
| MICs | ||
ATM MIC with SFP | MIC-3D-8OC3-2OC12-ATM | 35 W |
Gigabit Ethernet MIC with SFP | MIC-3D-20-GE-SFP | 37 W |
10-Gigabit Ethernet MIC with XFP | 2-Port: MIC-3D-2XGE-XFP 4-Port: MIC-3D-4XGE-XFP | 2-Port: 29 W 4-Port: 37 W |
10-Gigabit Ethernet MIC with SFP+ | MIC6-10G | 74 W With optics:53 W at 55° C, 40° C and 25° C with 10G BASE-SR and 10G BASE-LR optics 66 W at 55° C, 40° C and 25° C with 10G BASE-ER optics 74 W at 55° C, 40° C and 25° C with 10G BASE-ZR optics |
10-Gigabit Ethernet DWDM OTN MIC | MIC6-10G-OTN | 84 W With optics:63 W at 55° C with 10G BASE-LR OTN optics 63 W at 40° C with 10G BASE-LR OTN optics 63 W at 25° C with 10G BASE-LR OTN optics |
40-Gigabit Ethernet MIC with QSFPP | MIC3-3D-2X40GE-QSFPP | 18 W |
100-Gigabit Ethernet MIC with CFP | MIC3-3D-1X100GE-CFP | 40 W |
100-Gigabit Ethernet MIC with CXP | MIC3-3D-1X100GE-CXP | 20 W |
100-Gigabit Ethernet MIC with CFP2 | MIC6-100G-CFP2 | 104 W With optics:94 W at 55° C with 100G BASE-LR4 OTN optics 86 W at 40° C with 100G BASE-LR4 OTN optics 74 W at 25° C with 100G BASE-LR4 OTN optics |
100-Gigabit Ethernet MIC with CXP | MIC6-100G-CXP | 57 W 49 W at 55° C with CXP SR10 optics 49 W at 40° C with CXP SR10 optics 49 W at 25° C with CXP SR10 optics |
100-Gigabit DWDM OTN MIC with CFP2 | MIC3-100G-DWDM | With optics: 91 W at 55° C 83 W at 25° C |
SONET/SDH OC3/STM1 Multi-Rate MIC | 4-Port: MIC-3D-4OC3OC12-1OC48 8-Port: MIC-3D-8OC3OC12-4OC48 | 4-Port: 24 W at 55° C 22.75 W at 40° C 21.5 W at 25° C 8-Port: 29 W at 55° C 27.75 W at 40° C 26.5 W at 25° C |
OC192/STM64 MIC with XFP | MIC-3D-1OC192-XFP | 41 W at 55° C 38.5 W at 40° C 36 W at 25° C |
Channelized SONET/SDH OC3/STM1 Multi-Rate MIC | 4-Port: MIC-3D-4CHOC3-2CHOC12 8-Port: MIC-3D-8CHOC3-4CHOC12 | 4-Port: 41 W at 55° C 40 W at 40° C 39 W at 25° C 8-Port: 52 W at 55° C 50.5 W at 40° C 49 W at 25° C |
Channelized OC48/STM16 MIC with SFP | MIC-3D-1CHOC48 | 56.5 W at 55° C 54.5 W at 40° C 53 W at 25° C |
Tri-Rate MIC | MIC-3D-40GE-TX | 41 W |
MIC-MRATE |
| |
DS3/E3 MIC | MIC-3D-8DS3-E3 MIC-3D-8CHDS3-E3-B | 36 W at 55° C 35 W at 40° C 34 W at 25° C |
Channelized OC3/STM1 (Multi-Rate) Circuit Emulation MIC with SFP | MIC-3D-4COC3-1COC12-CE | 33.96 W |
