Overview of Preparing the Site for the MX2010 Router

To prepare a site for router installation:

1. Verify that environmental factors such as temperature and humidity do not exceed router tolerances. See:

   • MX2010 Router Environmental Specifications

2. Verify that the site and installation plan meets all safety guidelines and requirements. See:

   • General Safety Guidelines for Juniper Networks Devices

3. Locate sites for connection of system grounding. See:

   • MX2010 Router Grounding Specifications.

4. Calculate the power consumption and requirements.

   Measure distance between external power sources and the router installation site. See:

   AC power:

   • MX2000 Three-Phase AC Power Electrical Safety Guidelines

   • MX2000 AC Power System Electrical Specifications

   • MX2000 Three-Phase Delta AC Power Distribution Module Electrical Specifications

   • MX2000 Three-Phase Wye AC Power Distribution Module Electrical Specifications

   • MX2000 Single-Phase AC Power Distribution Module Electrical Specifications

   • MX2010 AC Power Requirements

   • MX2000 AC Power Cord Specifications

   DC Power:

   • MX2010 DC Power Electrical Safety Guidelines

   • MX2010 DC Power (-48 V) System Electrical Specifications

   • MX2010 DC Power Supply Module (-48 V) Description

   • MX2000 DC Power Supply Module (240 V China) Description

   • MX2010 DC Power Requirements

   • DC Power Cable Specifications for the MX2010 Router

   • MX2010 DC Power Distribution Description (-48 V)

   • MX2000 DC Power Distribution Module (240 V China) Description

   • HVAC/HVDC Power:

     • MX2010 High-Voltage Universal (HVAC/HVDC) Power Requirements

     • MX2000 High-Voltage Universal PDM (MX2K-PDM-HV) Power Cord Specifications

     • MX2010 High-Voltage Universal (HVAC/HVDC) Power Distribution Module Description

     • MX2000 Router High-Voltage Universal (HVAC/HVDC) Power Subsystem Electrical Specifications

       MX2010 High-Voltage Universal (HVAC/HVDC) Power Supply Module Description

5. Plan rack location, including required space clearances. See:

   • Clearance Requirements for Airflow and Hardware Maintenance for the MX2010 Router

   • MX2010 Physical Specifications

6. Verify that the plan for power installation meets all electrical safety guidelines. See:

   General Electrical Safety Guidelines and Electrical Codes for Juniper Networks Devices

7. Verify that your rack meets the minimum requirements for the installation of the router. See:

   • MX2010 Rack Requirements

   • MX2010 Chassis Description

8. Plan to secure the rack to the floor and building structure.

   • See: MX2010 Rack Requirements

9. Acquire cables and connections. See:

   • Determine the number of cables and type of cable needed based on your planned configuration.

     • MX Series Interface Module Reference

     • You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.

   • Review the maximum distance allowed for each cable. Choose the length of cable based on the distance between the hardware components being connected. See:

     • Calculating Power Budget and Power Margin for Fiber-Optic Cables

     • Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion

10. Plan the cable routing and management. See:

    • MX2010 Cable Manager Description

    • Maintaining Cables That Connect to MX2010 MPCs or MICs