[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

VoIP Configuration Overview

To configure VoIP, you perform the tasks listed in Table 105. For instructions, see the cross-references in the table.

Table 105: VoIP Configuration Overview

Task	Instructions
Perform prerequisite tasks.	Before You Begin
On the Services Router
1. Make the following assignments: Assign an IP address to the Services Router VoIP interface (vp-pim/0/0). Assign an IP address to the TGM550. Assign a Media Gateway Controller (MGC) list for the TGM550.	Configuring VoIP Interfaces with EPW and Disk-on-Key Configuring VoIP Interfaces with Quick Configuration Configuring the VoIP Interface (Required) and Configuring the Media Gateway Controller List (Required)
2. Optionally, configure dynamic CAC on Services Router WAN interfaces. (You must also configure CAC-BL on Avaya Communication Manager (CM)).	Configuring Dynamic Call Admission Control on WAN Interfaces (Optional)
3. Verify the VoIP configuration on the router.	Verifying the VoIP Configuration
4. Perform administrative tasks as necessary. Modify the TGM550 IP address Monitor the TGM550 Media Gateway.	Modifying the IP Address of the TGM550 For information about monitoring the TGM550 media gateway, see the J-series Services Router Administration Guide
On the TGM550
1. If you have not already done so, establish a user account (username and password) on the TGM550 with your system administrator.	See the Administration Guide and CLI Reference for the Avaya IG550 Integrated Gateway.
2. If you have not already done so, connect to the TGM550.	See Connecting Through the TGM550 Console Port, Connecting to the TGM550 with SSH or Connecting to the TGM550 with Telnet.
3. Configure the TGM550 and one or more TIMs as necessary for your network.	See the following Avaya manuals: Installing and Configuring the Avaya IG550 Integrated Gateway Administration Guide and CLI Reference for the Avaya IG550 Integrated Gateway
4. Perform administrative tasks as necessary.	Accessing the Services Router from the TGM550 Resetting the TGM550 Saving the TGM550 Configuration In addition, see the Administration Guide and CLI Reference for the Avaya IG550 Integrated Gateway.
On Avaya Devices
Configure and administer Avaya Communication Manager (CM) on the configured Media Gateway Controllers (MGCs) to support the IG550 Integrated Gateway.	See the following Avaya manuals: Installing and Configuring the Avaya IG550 Media Gateway Administration Guide and CLI Reference for the Avaya IG550 Integrated Gateway Administrator Guide for Avaya Communication Manager Avaya Maintenance Procedures for Communication Manager, Media Servers, and Media Gateways Avaya Maintenance Commands for Communication Manager, Media Servers, and Media Gateways Avaya Maintenance Alarms for Communication Manager, Media Servers, and Media Gateways

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]