[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Configuring Dynamic DNS with Quick Configuration

The Dynamic DNS Quick Configuration page allows you to configure the dynamic DNS server that maintains the list of the changed addresses and their associated domain names registered with it. The device updates these DDNS servers with this information periodically or whenever there is a change in IP addresses.

Figure 20 shows the Dynamic DNS Quick Configuration page.

Figure 20: Dynamic DNS Quick Configuration Page

Image g030123.gif

To configure dynamic DNS with Quick Configuration:

  1. In the J-Web user interface, select Configuration > Quick Configuration > Dynamic DNS.
  2. Under Dynamic DNS, click Add and enter information into the respective Quick Configuration page as described in Table 78
  3. From the Dynamic DNS Quick Configuration pages, click one of the following buttons:
  4. To check the Dynamic DNS configuration, see Verifying the Dynamic DNS Client and Verifying the Dynamic DNS Client.

Table 78: Dynamic DNS Quick Configuration Summary

Field

Function

Your Action

Client Host Name (required)

Specifies the hostname of the registered client.

Type the client hostname.

Server

Specifies the name of the dynamic DNS server that allows dynamic DNS clients to update the IP address changes associated to the registered hostname.

Type the name of the dynamic DNS server. (For example, dyndns.org).

Agent

Specifies the name of the dynamic DNS agent.

Type the name of the dynamic DNS agent.

Username

Specifies the dynamic DNS username.

Type the username that the DDNS agent uses to update the DDNS server.

Password

Specifies the password.

Type the password associated with the DDNS agent username to update the DDNS server.

Interface (required)

Specifies the interface whose IP address is mapped to the registered domain name.

Select the interface on the device whose IP address is mapped to the registered domain name.


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]