[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
Installing Software Upgrades by Uploading Files
You can use the J-Web interface to install software packages uploaded
from your computer. Before installing the software upgrade, you need
to verify that there is enough available space on the compact flash.
 |
Note:
This procedure applies only to upgrading one JUNOS software
release to another or one JUNOS software with enhanced services release
to another. To upgrade from the JUNOS software to JUNOS software with
enhanced services, see the JUNOS Software with Enhanced Services Migration Guide.
|
Figure 25 shows the Upload Package page for
the device.
Figure 25: Upload Package Page
To install software upgrades by uploading files:
- Before installing the software upgrade, verify
the available space on the compact flash. For information about verifying
available compact flash space, see the JUNOS Software with Enhanced Services Release Notes.
- Download the software package as described in Downloading Software Upgrades from Juniper Networks.
- In the J-Web interface, select Manage>Software>Upload
Package.
- On the Upload Package page, enter information into
the fields described in Table 177.
- Click Upload Package. The
software is activated after the device has rebooted.
Table 177: Upload Package Summary
|
Field
|
Function
|
Your Action
|
|
File to Upload (required)
|
Specifies the location of the software package on the local
system.
|
Type the location of the software package, or click Browse to navigate to the location.
|
|
Reboot If Required
|
If this box is checked the device is automatically rebooted
when the upgrade is complete.
|
Select the check box if you want the device to reboot
automatically when the upgrade is complete.
|
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]