| RIP Statistics |
|
Rip info
|
Information about RIP on the specified interface, including
UDP port number, hold-down interval (during which routes are neither
advertised nor updated), and timeout interval.
| |
|
Logical interface
|
Name of the logical interface on which RIP is configured.
| |
|
Routes learned
|
Number of RIP routes learned on the logical interface.
| |
|
Routes advertised
|
Number of RIP routes advertised on the logical interface.
| |
| RIP
Neighbors | |
|
Neighbor
|
Name of the RIP neighbor.
|
This value is the name of the interface on which RIP is enabled.
The name is set in either of the following ways:
- In the J-Web configuration editor, on the Protocols>RIP>Group> group-name>Neighbor page
- In the CLI configuration editor, with the neighbor neighbor-name statement at the [edit protocols
rip group group-name] level of the configuration
hierarchy
|
|
State
|
State of the RIP connection: Up or Dn (Down).
| |
|
Source Address
|
Local source address.
|
This value is the configured address of the interface on which
RIP is enabled.
|
|
Destination Address
|
Destination address.
|
This value is the configured address of the immediate RIP adjacency.
|
|
In Met
|
Value of the incoming metric configured for the RIP neighbor.
| |