|
Ingress LSP
|
Information about inbound RSVP sessions. Each session has one
line of output.
| |
|
Egress LSP
|
Information about outbound RSVP sessions. Each session has one
line of output.
|
MPLS learns this information by querying RSVP, which holds all
the transit and outbound session information.
|
|
Transit LSP
|
Information about transit RSVP sessions.
|
MPLS learns this information by querying RSVP, which holds all
the transit and outbound session information.
|
|
To
|
Destination (outbound device) of the session.
| |
|
From
|
Source (inbound device) of the session.
| |
|
State
|
State of the path: Up, Down, or AdminDn.
|
AdminDn indicates that the LSP is being
taken down gracefully.
|
|
Rt
|
Number of active routes (prefixes) installed in the routing
table.
|
For inbound RSVP sessions, the routing table is the primary
IPv4 table (inet.0). For transit and outbound RSVP sessions,
the routing table is the primary MPLS table (mpls.0).
|
|
Style
|
RSVP reservation style. This field consists of two parts. The
first is the number of active reservations. The second is the reservation
style, which can be FF (fixed filter), SE (shared
explicit), or WF (wildcard filter).
|
This field is used for outbound and transit LSPs only.
|
|
Labelin
|
Incoming label for this RSVP session.
| |
|
Labelout
|
Outgoing label for this RSVP session.
| |
|
LSPname
|
Configured name of the LSP.
| |
|
Total
|
Total number of RSVP sessions displayed for the particular type—ingress (inbound), egress (outbound),
or transit).
| |