L2 Circuit Service Health Check Results

The L2 Circuit accordion displays the L2 circuit service related components.

To access the L2 Circuit accordion:

1. Navigate to the Orchestration > Instances > Service Instances page.

2. Select a service instance and click the service-instance-name hyperlink to access the Service-Instance-Name Details page

3. Click the Passive Assurance tab.

4. Click and expand the L2 Circuit accordion.

Table 1 lists the fields in the L2VPN NSM table. You can show or hide columns in the table or reset page preferences, using the vertical ellipsis menu.

The Relevant Events section on the right side of the accordion displays the last two events (alerts) in order of their severity. Hover over the View Details hyperlink to view more information about an event in a pop-up. Click View All Relevant Events to view all events or anomalies related to the L2 circuit service. You can view relevant events for the past seven days.

To view details of health check results for the L2 circuit service connection status, click any hyperlinked entry in the L2VPN NSM table to open the L2CKT Detail page.

Table 1: Fields in the L2Circuit Accordion

Field	Description
Device Name	Name of the PE device through which the L2 circuit service spans.
Neighbor	The IP address of the peer or neighbor PE device with which the PE device connects to create the L2 circuit in the MPLS network.
Connection ID	Unique identifier for the L2 circuit connection between the two PE devices. The connection ID is in the logical-interface-name (virtual-circuit-id) format. For example, xe-0/0/0/0.0(vc 2).
Connection Status	The connection status of the L2 circuit: Up—The L2 circuit connection is active or operational. Down—The L2 circuit connection is not in active or operational state.