close
keyboard_arrow_left
Table of Contents
- play_arrow Subscriber-Aware and Application-Aware Traffic Treatment Overview
- play_arrow Subscriber-Aware and Application-Aware Traffic Treatment Overview
-
- play_arrow Configuring Reporting for Subscriber-Aware Data Sessions
- play_arrow Configuring Reporting
-
- play_arrow Modifying Subscriber-Aware Configuration
- play_arrow Modifying Subscriber-Aware Configuration in Maintenance Mode
- Maintenance Mode Overview for Subscriber Aware Policy Enforcement
- Changing Address Attributes in the Address Pool
- Deleting an Address Pool
- Changing AMS Interface Parameters on a TDF Gateway
- Modifying a TDF Domain
- Modifying the TDF Interface of a TDF Domain
- Deleting a TDF Domain
- Changing a TDF Interface
- Deleting a TDF Interface
- Changing TDF Gateway Parameters with Maintenance Mode
- Changing PCEF Profiles, PCC Rules, PCC Rulebases, Diameter Profiles, Flow Descriptions, and PCC Action Profiles
- Deleting a PCEF Profile
- Changing Static Time-of-Day Settings for PCC Rules
- Deleting a Services PIC
- Deleting a Session PIC
-
- play_arrow Monitoring and Troubleshooting
- play_arrow Monitoring and Troubleshooting
-
- play_arrow Configuration Statements and Operational Commands
list Table of Contents
Configuring IP-Based TDF Subscriber Setup When Accounting Requests Are Snooped
date_range
13-Jan-21
This task describes how to configure IP-based TDF subscriber setup when the gateway GPRS support node (GGSN), Packet Data Network Gateway (PGW), or broadband network gateway (BNG) does not identify the MX Series router as a RADIUS server.
Before you configure the subscriber setup, you must do the following:
Configure the PCEF profile.
Configure a TDF gateway.
To configure IP-based subscriber setup when the MX Series router does not act as a RADIUS server:
