Rate and give feedback:  Feedback Received. Thank You!

Rate and give feedback: 

X

This document helped resolve my issue

Yes No

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:  

E-mail: 

Enter a valid Email ID

Need product assistance? Contact Juniper Support

Submit

This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.

bert-algorithm

Syntax

Hierarchy Level

Release Information

Statement introduced before Junos OS Release 7.4.

Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access Routers.

Description

Configure the pattern to send in the bit stream during a bit error rate test (BERT). Applies to T1, E3, T3, and multichannel DS3 interfaces, the channelized interfaces (DS3, OC12, STM1), and channelized IQ and IQE interfaces (E1, E3 and DS3).

Note: When configuring CE1 or CT1 interfaces on 10-port Channelized E1/T1 IQE PICs, the bert-algorithm statement must be included at the [edit interfaces ce1-fpc/pic/port] or [edit interfaces ct1-fpc/pic/port] hierarchy level as appropriate.

Options

algorithm—Pattern to send in the bit stream. There are two categories of test patterns: pseudorandom and repetitive. Both patterns conform to CCITT/ITU O.151, O.152, O.153, and O.161 standards. The algorithm can be one of the following patterns:

• all-ones-repeating—Pattern is all ones.
• all-zeros-repeating—Pattern is all zeros.
• alternating-double-ones-zeros—Pattern is alternating pairs of ones and zeros.
• alternating-ones-zeros—Pattern is alternating ones and zeros.
• pseudo-2e3—Pattern is 2³ – 1.
• pseudo-2e4—Pattern is 2⁴ – 1.
• pseudo-2e5—Pattern is 2⁵ – 1.
• pseudo-2e6—Pattern is 2⁶ – 1.
• pseudo-2e7—Pattern is 2⁷ – 1.
• pseudo-2e9-o153—Pattern is 2⁹ – 1, as defined in the O153 standard.
• pseudo-2e10—Pattern is 2¹⁰ – 1.
• pseudo-2e11-o152—Pattern is 2¹¹ – 1, as defined in the O152 standard.
• pseudo-2e15-o151—Pattern is 2¹⁵ – 1, as defined in the O151 standard.
• pseudo-2e17—Pattern is 2¹⁷ – 1.
• pseudo-2e18—Pattern is 2¹⁸ – 1.
• pseudo-2e20-o151—Pattern is 2²⁰ – 1, as defined in the O151 standard.
• pseudo-2e20-o153—Pattern is 2²⁰ – 1, as defined in the O153 standard.
• pseudo-2e21—Pattern is 2²¹ – 1.
• pseudo-2e22—Pattern is 2²² – 1.
• pseudo-2e23-o151—Pattern is 2²³ – 1, as defined in the O151 standard.
• pseudo-2e25—Pattern is 2²⁵ – 1.
• pseudo-2e28—Pattern is 2²⁸ – 1.
• pseudo-2e29—Pattern is 2²⁹ – 1.
• pseudo-2e31—Pattern is 2³¹ – 1.
• pseudo-2e32—Pattern is 2³² – 1.
• repeating-1-in-4—One bit in four is set to 1; the others are set to 0.
• repeating-1-in-8—One bit in eight is set to 1; the others are set to 0.
• repeating-3-in-24—Three bits in twenty four are set to 1; the others are set to 0.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.