Supported Platforms
Related Documentation
- ACX Series
- Configuring E1 BERT Properties
- Configuring T1 BERT Properties
- bert-algorithm
- bert-error-rate
- EX Series
- Interface Diagnostics
- J Series
- Interface Diagnostics
- M Series
- Interface Diagnostics
- Configuring E1 BERT Properties
- Configuring E3 BERT Properties
- Configuring T1 BERT Properties
- Configuring T3 BERT Properties
- bert-algorithm
- bert-error-rate
- MX Series
- Interface Diagnostics
- Configuring E1 BERT Properties
- Configuring E3 BERT Properties
- bert-algorithm
- bert-error-rate
- PTX Series
- Interface Diagnostics
- SRX Series
- bert-algorithm
- bert-error-rate
- T Series
- Interface Diagnostics
- Configuring E1 BERT Properties
- Configuring E3 BERT Properties
- Configuring T1 BERT Properties
- Configuring T3 BERT Properties
bert-period
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access Routers.
Description
Configure the duration of a BERT test. Applies to E1, E3, T1, and T3 interfaces, and to E1, E3, T1, and T3 partitions on the channelized interfaces (CE1, CT1, DS3, OC3, OC12, OC48, STM1, STM4, and STM16).
E1 and T1 IQ, IQE, and standard interfaces support an extended BERT period range, up to 86,400 seconds (24 hours).
 | Note: When configuring CE1 or CT1 interfaces on 10-port Channelized E1/T1 IQE PICs, the bert-period statement must be included at the [edit interfaces ce1-fpc/pic/port] or [edit interfaces ct1-fpc/pic/port] hierarchy level as appropriate. |
Options
seconds—Test duration. Range and default values vary by interface type.
Range:
- PIC-dependent—Normal BERT period: either 1 through 239 seconds or 1 through 240 seconds
- PIC-dependent—Extended BERT period: from 1 through 86,400 seconds
Default:
- Normal BERT period: 10 seconds
- Extended BERT period (on supported E1 interfaces): 10 seconds
- Extended BERT period (on supported T1 interfaces): 240 seconds
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- ACX Series
- Configuring E1 BERT Properties
- Configuring T1 BERT Properties
- bert-algorithm
- bert-error-rate
- EX Series
- Interface Diagnostics
- J Series
- Interface Diagnostics
- M Series
- Interface Diagnostics
- Configuring E1 BERT Properties
- Configuring E3 BERT Properties
- Configuring T1 BERT Properties
- Configuring T3 BERT Properties
- bert-algorithm
- bert-error-rate
- MX Series
- Interface Diagnostics
- Configuring E1 BERT Properties
- Configuring E3 BERT Properties
- bert-algorithm
- bert-error-rate
- PTX Series
- Interface Diagnostics
- SRX Series
- bert-algorithm
- bert-error-rate
- T Series
- Interface Diagnostics
- Configuring E1 BERT Properties
- Configuring E3 BERT Properties
- Configuring T1 BERT Properties
- Configuring T3 BERT Properties
Published: 2012-12-11
Supported Platforms
Related Documentation
- ACX Series
- Configuring E1 BERT Properties
- Configuring T1 BERT Properties
- bert-algorithm
- bert-error-rate
- EX Series
- Interface Diagnostics
- J Series
- Interface Diagnostics
- M Series
- Interface Diagnostics
- Configuring E1 BERT Properties
- Configuring E3 BERT Properties
- Configuring T1 BERT Properties
- Configuring T3 BERT Properties
- bert-algorithm
- bert-error-rate
- MX Series
- Interface Diagnostics
- Configuring E1 BERT Properties
- Configuring E3 BERT Properties
- bert-algorithm
- bert-error-rate
- PTX Series
- Interface Diagnostics
- SRX Series
- bert-algorithm
- bert-error-rate
- T Series
- Interface Diagnostics
- Configuring E1 BERT Properties
- Configuring E3 BERT Properties
- Configuring T1 BERT Properties
- Configuring T3 BERT Properties
