Navigation
ATM1 Physical and Logical Configuration Statement Hierarchies
To configure ATM1 physical interface properties, include the atm-options, e3-options, t3-options, and sonet-options statements at the [edit interfaces at-fpc/pic/port] hierarchy level:
ATM1 Physical Configuration Hierarchy
[edit interfaces at-fpc/pic/port]atm-options {ilmi;mpls {pop-all-labels {required-depth number;}}pic-type atm1;promiscuous-mode {vpi vpi-identifier;}vpi vpi-identifier {maximum-vcs maximum-vcs;}}e3-options {atm-encapsulation (direct | plcp);buildout feet;framing (g.751 | g.832);loopback (local | remote);(payload-scrambler | no-payload-scrambler);}encapsulation (atm-ccc-cell-relay | atm-pvc | ethernet-over-atm);sonet-options {aps {advertise-interval milliseconds;authentication-key key;force;hold-time milliseconds;lockout;neighbor address;paired-group group-name;protect-circuit group-name;request;revert-time seconds;working-circuit group-name;}bytes {e1-quiet value;f1 value;f2 value;s1 value;z3 value ;z4 value;}loopback (local | remote);(payload-scrambler | no-payload-scrambler);rfc-2615;trigger {defect ignore {hold-time up milliseconds down milliseconds;}}(z0-increment | no-z0-increment);}t3-options {atm-encapsulation (direct | plcp);buildout feet;(cbit-parity | no-cbit-parity);loopback (local | payload | remote);(payload-scrambler | no-payload-scrambler);}
To configure ATM1 logical interface properties, include the following statements:
ATM1 Logical Configuration Hierarchy
allow-any-vci;multicast-vci vpi-identifier.vci-identifier;oam-liveness {up-count cells;down-count cells;}oam-period (disable | seconds);shaping {(cbr rate | vbr peak rate sustained rate burst length);queue-length number;}vci vpi-identifier.vci-identifier;vpi vpi-identifier;family inet {address address {multipoint-destination address {inverse-arp;oam-liveness {up-count cells;down-count cells;}oam-period (disable | seconds);shaping {(cbr rate | vbr peak rate sustained rate burst length);queue-length number;}vci vpi-identifier.vci-identifier;}}}
You can include these statements at the following hierarchy levels:
- [edit interfaces interface-name unit logical-unit-number]
- [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]