Navigation
Supported Platforms
[edit protocols ospf3] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit protocols ospf3] hierarchy level on EX Series switches.
- Supported statements are those that you can use to configure some aspect of a software feature on the switch.
- Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
- Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.
This topic lists:
Supported Statements in the [edit protocols ospf3] Hierarchy Level
The following hierarchy shows the [edit protocols ospf3] configuration statements supported on EX Series switches:
protocols {ospf3 {area area-id {area-range ip-prefix</prefix-length> <exact> <override-metric metric> <restrict>;context-identifierinter-area-prefix-export [ policy-names ];inter-area-prefix-import [ policy-names ];interface interface-name {bandwidth-based-metrics {bandwidth value metric number;}bfd-liveness-detection {authentication {algorithm (keyed-md5 | keyed-sha-1 | meticulous-keyed-md5 | meticulous-keyed-sha-1 | simple-password);loose-check;}detection-time {threshold milliseconds;}full-neighbors-only;minimum-interval milliseconds;minimum-receive-interval milliseconds;multiplier number;no-adaptation;transmit-interval {minimum-interval milliseconds;threshold milliseconds;}version (0|1 | automatic);}dead-interval seconds;disable;flood-reduction;hello-interval seconds;interface-type (p2mp-over-lan | p2p);ipsec-sa sa-name;(link-protection | node-link-protection);metric metric;no-eligible-backup;passive {traffic-engineering {remote-node-id address;}}priority number;retransmit-interval seconds;secondary;transit-delay seconds;}no-context-identifier-advertisement;nssa {area-range ip-prefix</prefix-length> <exact> <override-metric metric> <restrict>;default-lsa {default-metric metric;metric-type type;type-7;}(summaries | no-summaries);}stub <default-metric metric> <summaries | no-summaries>;}backup-spf-options (disable | downstream-paths-only | no-install); database-protection {ignore-count number;ignore-time seconds;maximum-lsa number;reset-time seconds;warning-only;warning-threshold percent;}disable;export [ policy-names ];external-preference preference;graceful-restart {disable;helper-disable;no-strict-lsa-checking;notify-duration seconds;restart-duration seconds;}import [ policy-names ];no-nssa-abr;no-rfc-1583;overload <timeout seconds>;preference preference;prefix-export-limit number;realm (ipv4-multicast| ipv6-multicast) {... same statements as at the [edit protocols ospf3] hierarchy level, EXCEPT FOR ...area area-id {interface interface-name {no-eligible-backup; # NOT valid at this level}}backup-spf-options { ... } # NOT valid at this levelrealm realm-identifier { ... } # NOT valid at this leveltraffic-engineering { ... } # NOT valid at this level}realm ipv4-unicast {... same statements as at the [edit protocols ospf3] hierarchy level, PLUS ...area area-id {interface interface-name {}}realm ipv6-unicast {... same statements as at the [edit protocols ospf3] hierarchy level, PLUS ...disable;backup-spf-options {disable;downstream-paths-only;no-install;}}reference-bandwidth reference-bandwidth;rib-group group-name;spf-options {delay milliseconds;holddown milliseconds;no-ignore-our-externals;rapid-runs number;}traceoptions {file filename <files number> <size maximum-file-size> <world-readable | no-world-readable>;flag flag <flag-modifier> <disable>;}traffic-engineering {ignore-lsp-metrics;shortcuts <lsp-metric-into-summary>;}}}
Unsupported Statements in the [edit protocols ospf3] Hierarchy Level
All statements in the [edit protocols ospf3] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exception:
Table 1: Unsupported [edit protocols ospf 3] Configuration Statements on EX Series Switches
Statement | Hierarchy |
|---|---|
Note: Variables, such as interface-name, are not shown in the statements or hierarchies. | |
key-chain | [edit protocols ospf3 area interface bfd-liveness-detection authentication] |
