Help us improve your experience.
Let us know what you think.
Do you have time for a two-minute survey?
Additional Comments
800 characters remaining
May we contact you if necessary?
This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.
Junos® OS Documentation for ACX, M, MX, PTX, and T Series Routers, Release 13.1
Hierarchical CoS Shaping-Rate Adjustments Overview
Shaping Rate Adjustments for Subscriber Local Loops Overview
CoS Adjustment Control Profiles Overview
Bandwidth Management for Downstream Traffic in Edge Networks Overview
Excess Bandwidth Distribution on MIC and MPC Interfaces Overview
Traffic Burst Management on MIC and MPC Interfaces Overview
Distribution of Demux Subscribers in an Aggregated Ethernet Interface
Setting Class-of-Service Parameters Using PPPoE Vendor-Specific Tags
Dedicated Queue Scaling for CoS Configurations on MIC and MPC Interfaces Overview
Subscriber Management Scaling Values [XLS]
Guidelines for Configuring Dynamic CoS for Subscriber Access
Guidelines for Configuring Shaping-Rate Adjustments for Subscriber Local Loops
Configuring CoS Adjustment Control Profiles
Configuring the Minimum Adjusted Shaping Rate on Scheduler Nodes for Subscribers
Configuring Shaping-Rate Adjustments on Queues
Enabling Shaping-Rate Adjustments for Subscriber Local Loops
Disabling Shaping-Rate Adjustments for Subscriber Local Loops
Disabling Hierarchical Bandwidth Adjustment for Subscriber Interfaces with Reverse-OIF Mapping
Configuring the Shaping Rate and Overhead Accounting Based on PPPoE Vendor-Specific Tags on Dynamic Subscriber Interfaces
Configuring Scheduler and Scheduler Map Sharing
Configuring Dynamic Shaping Parameters to Account for Overhead in Downstream Traffic Rates
Managing Excess Bandwidth Distribution for Dynamic CoS on MIC and MIC Interfaces
Providing Accurate Scheduling for a Demux Subscriber Interface of Aggregated Ethernet Links
Managing Dedicated and Remaining Queues for Dynamic CoS Configurations on MIC and MPC Interfaces
Example: Configuring Initial CoS Parameters Dynamically Obtained from RADIUS
Example: Configuring Dynamic Shaping Parameters to Account for Overhead in Downstream Traffic Rates
Example: Configuring Hierarchical CoS Shaping-Rate Adjustments for Subscriber Local Loops
[edit dynamic-profiles] Hierarchy Level
[edit class-of-service] Hierarchy Level
adjustment-control-profiles
adjust-minimum
adjust-percent
ancp
application
buffer-size
bytes
cell-mode
class-of-service
delay-buffer-rate
dynamic-class-of-service-options
excess-priority
excess-rate (Dynamic Schedulers)
excess-rate (Dynamic Traffic Shaping)
excess-rate-high (Dynamic Traffic Shaping)
excess-rate-low (Dynamic Traffic Shaping)
frame-mode
guaranteed-rate
interfaces
max-queues-per-interface
multicast
no-qos-adjust
overhead-accounting
pppoe-tags
radius-coa
routing-options
schedulers
shaping-rate
targeted-distribution
traffic-control-profiles
transmit-rate
unit
vendor-specific-tags
Verifying the Scheduling and Shaping Configuration for Subscriber Access
Verifying the Number of Dedicated Queues Configured on MIC and MPC Interfaces
Verifying the Distribution of Demux Subscribers in an Aggregated Ethernet Interface
Verifying the Configuration of Shaping-Rate Adjustments for Subscriber Local Loops
Verifying the Configuration of ANCP for Shaping-Rate Adjustments
Verifying the CoS Adjustment Control Profile Configuration
show class-of-service
show class-of-service interface
show class-of-service interface-set
show class-of-service scheduler-map
show class-of-service traffic-control-profile
show class-of-service adjustment-control-profile
COSD System Log Messages
Collecting Subscriber Access Logs Before Contacting Juniper Technical Support
http://kb.juniper.net/
© 1999 - 2018 Juniper Networks, Inc. All rights reserved