Navigation
Configuring T3 Physical Interface Properties
To configure T3-specific physical interface properties, include the t3-options statement at the [edit interfaces interface-name] hierarchy level:
[edit interfaces interface-name]
t3-options {bert-algorithm algorithm;bert-error-rate rate;bert-period seconds;(cbit-parity | no-cbit-parity);compatibility-mode (adtran | digital-link | kentrox | larscom | verilink) <subrate value>;fcs (16 | 32);(feac-loop-respond | no-feac-loop-respond);idle-cycle-flag value;(long-buildout | no-long-buildout);(loop-timing | no-loop-timing);loopback (local | payload | remote);(payload-scrambler | no-payload-scrambler);start-end-flag value;}
