Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Connecting Directly to the CTP2000 Platform

Note:

You don't need an adapter for PPF84, as it has RJ45 console port. See Figure 1.

When you connect a console directly to the device, use the COM 2 port on the RJ-45 connector. To do this, you must use the special DB-9 adapter with a straight-through RJ-45 cable. Direct access through the COM 2 serial port enables you to monitor the device while it boots.

To connect a console directly to the device:

  1. Connect the socket DB-9 connector to the COM 2 port on the device’s RTM.
  2. Connect the crossover adapter connector to your PC's serial port.
  3. Power on the device.

    When you power on the device, the CLI appears on your console's screen. You can begin configuration.

Related Documentation