- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Maintaining Components
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
- play_arrow Safety and Compliance Information
- General Safety Guidelines and Warnings
- Definitions of Safety Warning Levels
- Restricted Access Warning
- Qualified Personnel Warning
- Prevention of Electrostatic Discharge Damage
- Fire Safety Requirements
- Laser and LED Safety Guidelines and Warnings
- Radiation from Open Port Apertures Warning
- Maintenance and Operational Safety Guidelines and Warnings
- General Electrical Safety Guidelines and Warnings
- AC Power Electrical Safety Guidelines
- DC Power Electrical Safety Guidelines
- DC Power Disconnection Warning
- DC Power Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Action to Take After an Electrical Accident
- Agency Approvals
- Acoustic Noise Compliance Statements
- EMC Requirements
SRX4200 Installation Overview
To install and connect an SRX4200 Firewall:
Follow instructions in Unpacking the SRX4200 Services Gateway.
Install power supplies if they are not preinstalled. See:
Mount the services gateway as described in Installing the SRX4200 Services Gateway in a Rack.
Connect the grounding cable as described in Connecting the SRX4200 Services Gateway Grounding Cable.
Follow instructions for connecting power as appropriate for your site. See:
Perform initial configuration by following the instructions in Configuring the SRX4200 Services Gateway.