- play_arrow Configuration
- play_arrow Configuration Example
- play_arrow Adding Bundles
- play_arrow Configuring SAToP Bundles (CTP Menu)
- Configuring the Default Bundle Data Protocol on the CTP Device (CTP Menu)
- Configuring IP Parameters for SAToP Bundles (CTP Menu)
- Configuring Virtual IP Parameters for SAToP Bundles (CTP Menu)
- Configuring Circuit Restart Parameters for SAToP Bundles (CTP Menu)
- Configuring the Missing Packet Fill Pattern for SAToP Bundles (CTP Menu)
- Configuring T1 and E1 Port Parameters for SAToP Bundles (CTP Menu)
- Configuring Adaptive Clocking for SAToP Bundles (CTP Menu)
- Configuring LOS Detection on CTP and SAToP Bundles (CTP Menu)
- play_arrow Configuring SAToP Bundles (CTPView)
- Configuring IP Parameters for SAToP Bundles (CTPView)
- Configuring Virtual IP Parameters for SAToP Bundles (CTPView)
- Configuring Circuit Restart Parameters for SAToP Bundles (CTPView)
- Configuring the Missing Packet Fill Pattern for SAToP Bundles (CTPView)
- Configuring T1 and E1 Port Parameters for SAToP Bundles (CTPView)
- Configuring Adaptive Clocking for SAToP Bundles (CTPView)
-
- play_arrow Troubleshooting
- play_arrow Knowledge Base
-
Interface Naming Conventions for the CTP Series
In the CTP software, interfaces are specified in the format:
type-slot/port
where
type | Type of interface. A two-character abbreviation. |
slot | Slot number on the CTP device. |
port | Port number on the CTP device. |
If the interface module has a daughter card installed, the interface format is as follows:
type-slot/port w/daughter-card
Interface Type | Type Specifier |
---|---|
4WE&M | 4w |
4WTO | 4w |
E1 | e1 |
2W-FXO | fo |
2W-FSX | fs |
IRIG | irig |
Serial | se |
T1 | t1 |
T1E1 | t1e1 |