optics-options
Syntax
optics-options application { hostid id mediaid id [ domainid id ]; } { alarm low-light-alarm { (link-down | syslog); } encoding (differential | non-differential); fec (hgfec | sdfec | sdfec15 | sdfec25); high-polarization; host-side-fec (off | on | not-supported); high-power-mode; (is-ma| no-is-ma); ( lane| lane-all); (laser-enable | no-laser-enable); loopback loopbacktype media-side-out; loopback loopbacktype media-side-in; loopback loopbacktype host-side-in; loopback loopbacktype host-side-out; los-alarm-threshold dBm; los-warning-threshold dBm; low-power-mode; media-side-fec (off | on |unsupported); modulation-format (16qam | 8qam | qpsk); signal-degrade { ber-threshold-clear ber-threshold-clear; ber-threshold-signal-degrade ber-threshold-signal-degrade; interval milliseconds; q-threshold-signal-degrade dB; q-threshold-signal-degrade-clear dB; } tca tca-identifier (enable-tca | no-enable-tca) (threshold number | threshold-24hrs number); tx-power dbm; warning low-light-warning { (link-down | syslog); } wavelength nm; loopback (local); }
Hierarchy Level
[edit interfaces interface-name]
Description
For 10-Gigabit Ethernet, 100-Gigabit Ethernet, or 400-Gigabit Ethernet ZR/ZR+ dense wavelength-division multiplexing (DWDM) interfaces only, configure full C-band International Telecommunication Union (ITU)-Grid tunable optics.
Options
-
application hostid id mediaid id [ domainid id ]—Displays host ID, media ID of a selected application. -
host-side-fec—Enable or disable the FEC on the host side optics.
— Configures a port in high-power mode.high-power-mode-
loopback—Configures the media side output loopback by default. -
loopback loopbacktype <loopbacktype>—Configures the loopback with an option. You can choose any of the following loopback options:-
media-side-out
-
media-side-in
-
host-side-in
-
host-side-out
-
-
los-alarm-threshold—Specify the Loss of Signal (LOS) threshold above which an alarm is raised. -
los-warning-threshold—Specify the Loss of Signal (LOS) threshold above which a warning is issued. -
low-power-mode—Forces the optics to be on low power mode. By default, it is disabled. On channelized interfaces, you can configure thelow-power-modeon channel 0 only. -
media-side-fec—Enable of disable the FEC on media side optics.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.
alarm option and warning options introduced in
Junos OS Release 10.0.
Statement and tx-power
option introduced in Junos OS Release 13.2 for PTX Series routers.
tca option introduced in Junos OS Release 14.2 for PTX Series
routers.
los-alarm-threshold and los-alarm-warning options
introduced in Junos OS Release 14.2.
loopback option introduced in Junos OS Release 19.2R1 for
QSFP-100GE-DWDM2 transceiver on MX10003, MX10008, MX10016, and MX204 routers.
lane, lane-allhost-side-fec, and
media-side-fec options introduced in Junos OS Evolved Release
21.1R1
local loopback option introduced in Junos OS Evolved Release 21.2R1
for PTX10001-36MR.
media-side-in, host-side-in,
host-side-out loopback types introduced in 23.1R1 for
PTX10001-36MR.
application hostid <> mediaid <> [ domainid <> ]
introduced in 23.1R1 for PTX10001-36MR.