Announcement: Try the Ask AI chatbot for answers to your technical questions about Juniper products and solutions.

close

header-navigation

Solutions
Products
Services
Partners
Support and Documentation
Learn

Trials and Demos

Trials and Demos

Using CESoPSN Bundles to Group DS0s on IP Circuits

keyboard_arrow_up

Expand All close

Using CESoPSN Bundles to Group DS0s on IP Circuits

Copyright and Trademark Information
Table of Contents
List of Tables
play_arrow Overview
- play_arrow Using Bundles to Create Logical Configurations for Physical Interfaces Overview
  - Types of Bundles Overview
  - Interface Naming Conventions for the CTP Series
- play_arrow CESoPSN Bundle Overview
  - CESoPSN Bundle Overview
  - Providing QoS for CTP Bundles by Using Service Type Overview
play_arrow Configuration
- play_arrow Configuring CESoPSN Bundles (CTP Menu)
- play_arrow Configuring CESoPSN Bundles (CTPView)
play_arrow Administration

list Table of Contents

PDF

English

Configuring the Missing Packet Fill Pattern for CESoPSN Bundles on CTP150 Devices (CTP Menu)

date_range 27-Jan-20

This topic describes how to specify the fill pattern that the CPT device inserts when IP packets are dropped.

To configure the missing packet fill pattern for CESoPSN bundles using the CTP Menu:

From the Main Menu, select 1) Bundle Operations.
Select 3) CESoPSN.
Select a bundle from the list.
If you select an active bundle, you are prompted to disable the bundle before configuring it.
Select 2) Config.
Select 10) Advanced Options.
Configure option 3) Missing pkt fill pattern as described in Table 10.

Field	Function	Your Action
Missing pkt fill pattern	Specifies the data that the CTP device inserts into the circuit bit stream when an IP packet is dropped. The number of bits inserted is equal to the number of bits in the missed packet. This data insertion method prevents a loss of bit count integrity to attached circuit devices and encryptors.	Enter two hexadecimal digits. You must enter a value other than ff. This field does not require the 0x characters.

Field

Function

Your Action

Missing pkt fill pattern

Specifies the data that the CTP device inserts into the circuit bit stream when an IP packet is dropped. The number of bits inserted is equal to the number of bits in the missed packet.

This data insertion method prevents a loss of bit count integrity to attached circuit devices and encryptors.

Enter two hexadecimal digits. You must enter a value other than ff. This field does not require the 0x characters.

arrow_backward PREVIOUS

NEXT arrow_forward Using CESoPSN Bundles to Group DS0s on IP Circuits

footer-navigation

Helped me install or use the product
Accelerated my deployment

Discuss the product with a co-worker
Make a purchase inquiry

Using CESoPSN Bundles to Group DS0s on IP Circuits

Configuring the Missing Packet Fill Pattern for CESoPSN Bundles on CTP150 Devices (CTP Menu)

Stay in touch