Navigation
Supported Platforms
Related Documentation
Key Configuration Statements Supported on ACX Series Routers
This topic includes key statements supported on ACX Series routers. The list does not include every statement supported on the ACX Series routers. If a statement does not appear in this list, you can take the following actions:
- Find the statements using the Search Engine.
- See Protocols and Applications Supported by the ACX Routers for a complete list of features and release dates.
The following list includes key statements supported on ACX Series routers:
- access-profile
- active
- aggregate
- aggregated-devices
- allow-any-vci
- announce-interval (Slave Clock)
- announce-interval (Master Clock)
- as-path
- asymmetry
- atm-options
- atm-policer (Firewall)
- atm-service
- auto-export
- autoinstallation
- autonomous-system
- backup-neighbor
- bits
- brief
- cdvt
- cesopsn-options
- chained-composite-next-hop
- classifiers
- classifiers (Physical Interface)
- clock-class-to-quality-level-mapping
- clocking
- clock-client
- clock-mode
- clock-mode (Chassis Synchronization)
- clock-source
- color
- community
- confederation
- convert-clock-class-to-quality-level
- delay-buffer-rate
- destination-networks
- disable (Interface)
- disable (Routing Options)
- discard
- dscp (Class of Service Classifier)
- dscp (Classifier on Physical Interface)
- dscp (Rewrite Rules on Physical Interface)
- dynamic-tunnels
- e1-options
- e1-options (BITS Interfaces Signal Type)
- ethernet-switch-profile
- encapsulation (Logical Interface)
- encapsulation (Physical Interface)
- esmc-transmit
- export
- flow
- flow-map
- forwarding-cache
- forwarding-class
- forwarding-table
- framing
- framing (E1 Options for BITS Interfaces)
- framing (T1 Options for BITS Interfaces)
- full
- generate
- gigether-options
- global-arp-prefix-limit
- global-supplementary-blackout-timer
- gps
- graceful-restart
- grant-duration
- gre
- group
- hold-interval
- host-fast-reroute
- ieee-802.1 (Classifier on Physical Interface)
- ieee-802.1 (Rewrite Rules on Physical Interface)
- ima-group-options
- ima-link-options
- inet-precedence
- inet-precedence (Classifier on Physical Interface)
- inet-precedence (Rewrite Rules on Physical Interface)
- ingress
- interface
- interface (Master Clock)
- interface (PTP Slave)
- interface-routes
- interface-type
- interfaces
- interfaces bits
- interfaces (Chassis Synchronization Source)
- ipv4-dscp
- l3vpn
- label-switched-path-template
- link-protection
- local-ip-address
- logical-interface-policer
- management
- manual
- martians
- master
- max-announce-interval
- max-burst-size
- max-delay-response-interval
- max-sync-interval
- maximum-paths
- maximum-prefixes
- med-igp-update-interval
- media-type
- metric
- min-announce-interval
- min-delay-response-interval
- min-sync-interval
- mtu
- multicast
- native-vlan-id
- network-option
- no-bfd-triggered-local-repair
- no-partition
- options (Routing Options)
- partition
- passive
- peak-rate
- policing-action
- policy
- ppm
- preference
- primary
- promiscuous-mode
- priority
- psn-vci
- psn-vpi
- quality-level (Chassis Synchronization Source Interface)
- quality-level (Clock Class Mapping PTP Slave)
- quality-mode-enable
- request
- rewrite-rules (Physical Interfaces)
- rib
- rib-group (Routing Options)
- route-distinguisher-id
- route-record
- router-id
- routing-options
- selection-mode
- satop-options
- signal-type
- slave
- source
- source-address (Routing Options)
- source-routing
- standby
- static (Protocols Layer 2 Circuit)
- static (Origin Validation for BGP)
- sustained-rate
- switchover-mode
- sync-interval (Slave)
- sync-interval (Master)
- synchronization
- system-defaults
- tag
- t1-options
- t1-options (BITS Interfaces Signal Type)
- timeslots
- traceoptions (Routing Options)
- traffic-control-profiles
- transport
- unicast
- unicast-mode (Master Clock)
- unicast-mode (PTP Slave Interface)
- validation
- vci
- vpi (Logical Interface and Interworking)
- vpi (ATM CCC Cell-Relay Promiscuous Mode)
- vpi (Define Virtual Path)
- vrf-propagate-ttl
- wait-to-restore
