Supported Platforms
[edit protocols bgp] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit protocols bgp] hierarchy level on EX Series switches.
- Supported statements are those that you can use to configure some aspect of a software feature on the switch.
- Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
- Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.
This topic lists:
Supported Statements in the [edit protocols bgp] Hierarchy Level
The following hierarchy shows the [edit protocols bgp] configuration statements supported on EX Series switches:
Unsupported Statements in the [edit protocols bgp] Hierarchy Level
All statements in the [edit protocols bgp] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:
Table 1: Unsupported [edit protocols bgp] Configuration Statements on EX Series Switches
Statement | Hierarchy Level |
---|---|
Note: Variables, such as family-name, are not shown in the statements or hierarchies. | |
accepted-prefix-limit | [edit protocols bgp family] |
add-path | [edit protocols bgp family] |
authentication-key-chain | [edit protocols bgp] |
cisco-non-deterministic | [edit protocols bgp path-selection] |
eternal-router-id | [edit protocols bgp path-selection] |
igp-multiplier | [edit protocols bgp path-selection] |
ipsec-sa | [edit protocols bgp] |
key-chain | [edit protocols bgp bfd-liveness-detection authentication] |
maximum | [edit protocols bgp family accepted-prefix-limit] |
med-multiplier | [edit protocols bgp path-selection] |
med-plus-igp | [edit protocols bgp path-selection] |
no-validate | [edit protocols bgp family inet flow] |
path-count | [edit protocols bgp family add-path send] |
prefix-policy | [edit protocols bgp family add-path send] |
receive | [edit protocols bgp family add-path] |
send | [edit protocols bgp family add-path] |
teardown | [edit protocols bgp family accepted-prefix-limit] |
vpn-apply-export | [edit protocols bgp] |