- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- play_arrow Maintaining Components
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
SRX4300 Agency Approvals
Agency Approvals
The SRX4300 complies with the following standards:
Safety
IEC 60950-1:2005, AMD 1:2009, AMD 2:2013 Information Technology Equipment
UL 60950-1:2007 R10.14 Information Technology Equipment
CAN/CSA-C22.2 No. 60950-1-07, AMD 1:2011, AMD 2:2014 Information Technology Equipment
IEC/EN 60825-1 Safety of Laser Products – Part 1: Equipment Classification
IEC 62368-1 2014 (2nd Edition) Audio/Video, Information and Communication Technology Equipment
IEC 62368-1 2018 (3rd Edition) Audio/Video, Information and Communication Technology Equipment
EN 62368-1:2014+A11:2017 Audio/Video, Information and Communication Technology Equipment
UL/CSA 62368-1 :2019 (3rd Edition) Audio/Video, Information and Communication Technology Equipment
EMC
FCC 47 CFR Part 15
ICES-003 / ICES-GEN
BS EN 55032
BS EN 55035
EN 300 386 V1.6.1
EN 300 386 V2.2.1
BS EN 300 386
EN 55032
CISPR 32
EN 55035
CISPR 35
IEC/EN 61000 Series
IEC/EN 61000-3-2
IEC/EN 61000-3-3
AS/NZS CISPR 32
VCCI-CISPR 32
BSMI CNS 15936
KS C 9835 (Old KN 35)
KS C 9832 (Old KN 32)
KS C 9610
BS EN 61000 Series
GR3160
VCCI 32-1
VCCI Class A (2007) Japanese Radiated Emissions
Environmental
Reduction of Hazardous Substances (RoHS) 6
DC NEBS (GR 3160)
ETSI EN-300386-2 Telecommunication Network Equipment. Electromagnetic Compatibility Requirements
Common Language Equipment Identifier (CLEI) code
Compliance Statements for NEBS
The equipment is suitable for installation as part of the Common Bonding Network (CBN).
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (i.e.DC-I), as defined in GR-1089-CORE.
For Juniper Networks systems with AC power supplies, an external surge protective device (SPD) must be used at the AC power source.