close
keyboard_arrow_left
Table of Contents
- play_arrow Overview
- play_arrow Initial Installation and Configuration
- play_arrow Contacting Customer Support and Returning the Chassis or Components
- play_arrow Safety and Compliance Information
- Definitions of Safety Warning Levels
- General Safety Guidelines and Warnings
- Restricted Access Warning
- Qualified Personnel Warning
- Prevention of Electrostatic Discharge Damage
- Fire Safety Requirements
- Laser and LED Safety Guidelines and Warnings
- Chassis and Component Lifting Guidelines
- Radiation from Open Port Apertures Warning
- Maintenance and Operational Safety Guidelines and Warnings
- Action to Take After an Electrical Accident
- General Electrical Safety Guidelines and Warnings
- AC Power Electrical Safety Guidelines
- SSR120 Agency Approvals
- FCC Declarations
- Lithium Battery Declaration
list Table of Contents
keyboard_arrow_right
Cable Specifications and Pinouts for SSR120
date_range
14-Mar-23
Console Port Connector Pinouts for SSR120
The console port is an RS-232 serial interface that uses an RJ-45 connector to connect to a console management device. The default baud rate for the console port is 115200 baud. Table 1 provides the pinout information for the RJ-45 console connector. An RJ-45 cable and RJ-45 to DB-9 adapter are supplied with the appliance.
Pin | Signal | Description |
|---|---|---|
1 | RTS Output | Request to send |
2 | DTR Output | Data terminal ready |
3 | TxD Output | Transmit data |
4 | Ground | Ground |
5 | Ground | Ground |
6 | RxD Input | Receive data |
7 | DSR Input | Data set ready |
8 | CTS Input | Clear to send |
