- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Initial Installation and Configuration
- play_arrow Contacting Customer Support and Returning the Chassis or Components
- play_arrow Safety and Compliance Information
- Definitions of Safety Warning Levels
- General Safety Guidelines and Warnings
- Restricted Access Warning
- Qualified Personnel Warning
- Prevention of Electrostatic Discharge Damage
- Fire Safety Requirements
- Laser and LED Safety Guidelines and Warnings
- Chassis and Component Lifting Guidelines
- Radiation from Open Port Apertures Warning
- Maintenance and Operational Safety Guidelines and Warnings
- Action to Take After an Electrical Accident
- General Electrical Safety Guidelines and Warnings
- AC Power Electrical Safety Guidelines
- SSR120 Agency Approvals
- FCC Declarations
- Lithium Battery Declaration
ON THIS PAGE
LTE Support on SSR120 Appliances
Overview
The SSR120 portfolio consists of models with or without LTE support. The LTE support is provided through the in-built LTE module that operates on both 3G and 4G networks. The SSR120 supports only a single SIM card.Table 1 provides a summary of the models that support LTE.
Model | Mode | Operating Region | Frequency Band |
---|---|---|---|
SSR120-AE |
|
| For 4G LTE:
For 3G:
|
SSR120-AA |
|
| For 4G LTE:
For 3G:
|
Antennas
The LTE module supports two multi-band swivel-mount dipole antennas, which can be rotated 90°. You can rotate the antennas and select the angle at which the signal strength is high. Table 2 lists the specifications for the antenna.
Specification | Value |
---|---|
Part Number | AP-DIPOLE-NEXT-C-IW-S2-BL (Airgain) |
Operating frequency range | 617 MHz-6.0 GHz |
Connector type | SMA |
Peak Gain |
|
Impedance | 50 Ohms |
Dimensions (L x W X H) | 252 mm x 35 mm x 13 mm |