Using VComp Bundles to Group Analog Circuits into One IP Circuit

keyboard_arrow_up

close

keyboard_arrow_left

Table of Contents Expand all

list Table of Contents

English

keyboard_arrow_right

Configuring 4WE&M Port Parameters for VComp Bundles (CTP Menu)

date_range 26-May-23

This topic describes how to configure port parameters for 4WE&M interfaces.

Before you begin:

To configure port parameters for 4WE&M interfaces using the CTP Menu:

From the Main Menu, select 1) Bundle Operations.
Select 4) VCOMP.
Select a bundle from the list.
If you select an active bundle, you are prompted to disable the bundle before configuring it.
Select 3) Port Config.
Follow the onscreen instructions, and configure the options as described in Table 1.

Table 1: VComp Bundle 4WE&M Port Parameter Settings in the CTP Menu
Field	Function	Your Action
Voice port Tx gain	Specifies the gain in the direction from the analog interface toward the IP network.	Enter a number from -23.8 through 1.6 dB in intervals of 0.1 dB.
Voice port Rx gain	Specifies the gain in the direction from the IP network to the analog interface.	Enter a number from -7.6 to 17.7 dB in intervals of 0.1 dB.

footer-navigation

Helped me install or use the product
Accelerated my deployment

Discuss the product with a co-worker
Make a purchase inquiry