Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Installing an MX2010 Router Overview

To install the MX2010 router:

Prepare your installation site. See:
- Overview of Preparing the Site for the MX2010 Router
Review the safety guidelines. See:
- General Safety Guidelines for Juniper Networks Devices
Unpack the router and verify the parts. See:
Install the mounting hardware. See:
- Installing the MX2010 Mounting Hardware for a Four-Post Rack or Cabinet
Remove all components. See:
- Removing Components from the MX2010 Router Chassis Before Installing It in a Rack
Install the router into the rack. See:
- Installing an MX2010 Router Using a Pallet Jack Overview
- Installing an MX2010 Router Using a Router Transport Kit Overview
Ground the router. See:
- Grounding an MX2000 Router
Reinstall all components. See:
- Reinstalling Components in the MX2000 Router After Initially Installing the Router in a Rack
Connect cables to the network and external devices. See:
- Connecting the MX2010 Router to Management and Alarm Devices.
Connect the AC power cord, 240-V China cables, DC power cables, universal (HVAC/HVDC) power cables. See:
Power on the router. See:
Perform the initial system configuration. See:
- Initially Configuring the MX2010 Router