Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Announcement: Try the Ask AI chatbot for answers to your technical questions about Juniper products and solutions.

close
header-navigation
keyboard_arrow_up
close
keyboard_arrow_left
list Table of Contents
file_download PDF
{ "lLangCode": "en", "lName": "English", "lCountryCode": "us", "transcode": "en_US" }
English
keyboard_arrow_right

Collecting Remote Windows Logs

date_range 24-Jul-21

This use case scenario describes the settings that are required in the WinCollect Configuration Console to collect windows logs from hosts that do not have WinCollect software installed, and send the logs to JSA.

Note:

WinCollect does not support reverting Citrix Virtual Machines that are polled remotely.

  1. Install the WinCollect Configuration Console on the windows machine that collects the log information. Download the patch from https://support.juniper.net/support/downloads/
  2. Create a credential to use when you log in to remote hosts. See Creating a WinCollect Credential.
  3. Create the JSA destination where Windows events are sent. See Adding a Destination to the WinCollect Configuration Console.
  4. Configure the devices that are monitored. See Adding a Device to the WinCollect Configuration Console.
    Note:

    In the Device Address field, type the IP address or hostname of the remote Windows system that you want to poll for events.

  5. Click Deploy Changes under Actions.
footer-navigation