close
keyboard_arrow_left
Table of Contents
- play_arrow Hierarchical Class of Service
- play_arrow Configuring Hierarchical Class of Service on MX Series 5G Universal Routing Platforms
- Hierarchical Class of Service Overview
- Hierarchical Class of Service Network Scenarios
- Understanding Hierarchical Scheduling
- Priority Propagation in Hierarchical Scheduling
- Hierarchical CoS for Metro Ethernet Environments
- Hierarchical Schedulers and Traffic Control Profiles
- Example: Building a Four-Level Hierarchy of Schedulers
- Scheduling and Shaping in Hierarchical CoS Queues for Traffic Routed to GRE Tunnels
- Example: Performing Output Scheduling and Shaping in Hierarchical CoS Queues for Traffic Routed to GRE Tunnels
- Configuring Ingress Hierarchical CoS
- Hierarchical Class of Service for Network Slicing
- play_arrow Configuring Hierarchical Class of Service on MICs, MPCs, MLCs, and Aggregated Ethernet Interfaces
- Understanding Hierarchical Scheduling for MIC and MPC Interfaces
- Configuring Ingress Hierarchical CoS on MIC and MPC Interfaces
- Per-Unit Scheduling and Hierarchical Scheduling for MPC Interfaces
- Dedicated Queue Scaling for CoS Configurations on MIC and MPC Interfaces Overview
- Jitter Reduction in Hierarchical CoS Queues
- Example: Reducing Jitter in Hierarchical CoS Queues
- Hierarchical Schedulers on Aggregated Ethernet Interfaces Overview
- Configuring Hierarchical Schedulers on Aggregated Ethernet Interfaces
- Example: Configuring Scheduling Modes on Aggregated Interfaces
- Increasing Available Bandwidth on Rich-Queuing MPCs by Bypassing the Queuing Chip
-
- play_arrow Configuration Statements and Operational Commands
list Table of Contents
Verifying the Configuration of ANCP for Shaping-Rate Adjustments
date_range
13-Jan-21
Purpose
Use to display or clear information about the ANCP configuration for shaping-rate adjustments.
Action
To display ANCP neighbor information, issue the show ancp neighbor operational command.
To clear ANCP neighbors, issue the clear ancp neighbor operational command.
To display ANCP subscriber information, issue the show ancp subscriber operational command.
To display ANCP class-of-service information, issue the show ancp cos operational command.
If ANCP is not yet enabled, the process starts when you commit a configuration that contains the protocols ancp stanza.
